-revert
mm: page allocator: calculate a better estimate of NR_FREE_PAGES when memory is low and kswapd is awake

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip
nfs_32b_radio2708.zip

Known Issues:
-At sleep, you may not get all the way down to 122, although this is what has been specified. This is being investigated.
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120710.zip
Download: boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120710.zip

32A:
boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-120710.zip
Download: boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-120710.zip

32B (Must be on New SPL + Radio 2708 Combo):
boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120710.zip
Download: boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120710.zip

——–

Source:
https://github.com/cyanogenmod/cm-kernel
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

-set EXT4 as buildable module

-merge (from cyanogenmod htc-kernel-msm7x30):
cpufreq: interactive: New ‘interactive’ governor

-merge (from android.git.kernel.org common):
net: wireless: bcm4329: Fix watchdog syncronization during start/stop
net: wireless: bcm4329: Fix driver ‘start’ retry ability
cpufreq interactive governor save/restore IRQs around cpumask spinlocks
net: wireless: bcm4329: Fix memory leak in case of dhd_bus_init() failure

Note:
This is a Work in Progress. Undervolt/Frequencies will be adjusted over the next coming weeks, as well as merging in further optimisations/tweaks from the DS/Nexus .35 release.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2632.26-oc-uv-xtra-neon_fp-120310.zip
Download: boot-cm_2632.26-oc-uv-xtra-neon_fp-120310.zip

lib-2632.26.tar.gz (kernel modules)
Download: lib-2632.26.tar.gz

——–

Source:
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/coolbho3k/vision_oc_kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

-merge (from cyanogenmod android-msm-2.6.35-unified):
cpufreq: interactive: New ‘interactive’ governor

-merge (from android.git.kernel.org common):
ext4: initialize the percpu counters before replaying the journal
fuse: fix attributes after open(O_TRUNC)
cpufreq interactive governor save/restore IRQs around cpumask spinlocks

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip
nfs_32b_radio2708.zip

Known Issues:
-At sleep, you may not get all the way down to 122, although this is what has been specified. This is being investigated.
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120310.zip
Download: boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120310.zip

32A:
boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-120310.zip
Download: boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-120310.zip

32B (Must be on New SPL + Radio 2708 Combo):
boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120310.zip
Download: boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120310.zip

——–

Source:
https://github.com/cyanogenmod/cm-kernel
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

-merge (from cyanogenmod android-msm-2.6.35-unified):
cpufreq: interactive: New ‘interactive’ governor

-merge (from android.git.kernel.org common):
ext4: initialize the percpu counters before replaying the journal
fuse: fix attributes after open(O_TRUNC)
net: wireless: bcm4329: Fix watchdog syncronization during start/stop
net: wireless: bcm4329: Fix driver ‘start’ retry ability
cpufreq interactive governor save/restore IRQs around cpumask spinlocks
net: wireless: bcm4329: Fix memory leak in case of dhd_bus_init() failure

Known Issues:
-**The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds**
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

**May not be an issue with current. Re-evaluating.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-120310.zip
Download: boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-120310.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel
https://github.com/thelogin/n1batcal

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

-revert
sched: Drop all load weight manipulation for RT tasks

-merge (from cyanogenmod android-msm-2.6.35-unified):
af_unix: limit unix_tot_inflight
af_unix: limit recursion level

Known Issues:
-**The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds**
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

**May not be an issue with current. Re-evaluating.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-120110.zip
Download: boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-120110.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel
https://github.com/thelogin/n1batcal

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

-revert
sched: Drop all load weight manipulation for RT tasks

-merge (from cyanogenmod android-msm-2.6.35-unified):
af_unix: limit unix_tot_inflight
af_unix: limit recursion level

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip
nfs_32b_radio2708.zip

Known Issues:
-At sleep, you may not get all the way down to 122, although this is what has been specified. This is being investigated.
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120110.zip
Download: boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-120110.zip

32A:
boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-120110.zip
Download: boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-120110.zip

32B (Must be on New SPL + Radio 2708 Combo):
boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120110.zip
Download: boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-120110.zip

——–

Source:
https://github.com/cyanogenmod/cm-kernel
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

-acpuclock-7×30: borrow power collapse logic from msm/scorpion acpuclock .35

-merged (from cyanogenmod htc-kernel-msm7x30):
-set USB_ANDROID_RNDIS_WCEIS
-Add USB_ANDROID_RNDIS_WCEIS option.

Note:
This is a Work in Progress. Undervolt/Frequencies will be adjusted over the next coming weeks, as well as merging in further optimisations/tweaks from the DS/Nexus .35 release.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2632.26-oc-uv-xtra-neon_fp-113010.zip
Download: boot-cm_2632.26-oc-uv-xtra-neon_fp-113010.zip

lib-2632.26.tar.gz (kernel modules)
Download: lib-2632.26.tar.gz

——–

Source:
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/coolbho3k/vision_oc_kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

-revert
increase softlockup_thresh to 90

-set TINY_RCU

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip
nfs_32b_radio2708.zip

Known Issues:
-At sleep, you may not get all the way down to 122, although this is what has been specified. This is being investigated.
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-113010.zip
Download: boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-113010.zip

32A:
boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-113010.zip
Download: boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-113010.zip

32B (Must be on New SPL + Radio 2708 Combo):
boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-113010.zip
Download: boot-cm_2635.9_ds_32b_radio2708-oc-uv-xtra-ram-fp-113010.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

-revert
increase softlockup_thresh to 90

Known Issues:
-**The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds**
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

**May not be an issue with current. Re-evaluating.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-113010.zip
Download: boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-113010.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel
https://github.com/thelogin/n1batcal

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

-switch to zinx’s implentation of GAN_ETH
-add in CPUFREQ downsampling factor (from 2.6.36 – merged in by cyanogen) – cpufreq_ondemand
-update ds2784_battery with ‘Timeout poll, fix AEvolt dmesg output’
-increase softlockup_thresh to 90
-set IPV6 and INET related to be built-in

Known Issues:
-**The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds**
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

**May not be an issue with current. Re-evaluating.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-112810.zip
Download: boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-112810.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel
https://github.com/thelogin/n1batcal

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor