Kernel – 2.6.35.8 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-merged (from android.git.kernel.org common):
1da5d9e403728f2a4c5ec9be4f8766da4a23724e (ext4: fix kernel oops if the journal superblock has a non-zero j_errno)

-merged (from ezterry master):
9ab5a22d2c22bbc35799 (Reclaim missing 1MB of ram on EBI0 32B Sapphire ..)
e268608eac162798efbb (USB debug message …)

-rebase to kernel.org’s 2.6.35.8

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

Things to do:
-Cleanup of some unused definitions in the camera space

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.8-oc-uv-xtra-btn-aud-ram-neon_fp-103010.zip
Download: boot-cm_2635.8-oc-uv-xtra-btn-aud-ram-neon_fp-103010.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.35.8 – OC-UV-RAM-FP – Dream/Sapphire (32B/A)

-merged (from android.git.kernel.org common):
1da5d9e403728f2a4c5ec9be4f8766da4a23724e (ext4: fix kernel oops if the journal superblock has a non-zero j_errno)

-merged (from ezterry master):
9ab5a22d2c22bbc35799 (Reclaim missing 1MB of ram on EBI0 32B Sapphire ..)
e268608eac162798efbb (USB debug message …)

-rebase to kernel.org’s 2.6.35.8

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

Known Issues:
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.8_ds_32b-oc-uv-xtra-ram-fp-103010.zip
Download: boot-cm_2635.8_ds_32b-oc-uv-xtra-ram-fp-103010.zip

32A:
boot-cm_2635.8_ds_32a-oc-uv-xtra-ram-fp-103010.zip
Download: boot-cm_2635.8_ds_32a-oc-uv-xtra-ram-fp-103010.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

Kernel – 2.6.35.7 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-set COMPACTION to N in scropion and msm configs

-merged (from cyanogenmod cm-kernel):
147cad8a5629335488cb (bcm4329: Revert to old roaming failure handling)
bf0aece68e198f592721 (mm: Allow compaction without HugeTLB)
3c66aa01b351aee9ffb1 (msm_q6venc: Fixed a bug in double stop..)
7afbbc5763a5b0a2e934 (msm_kgsl: Fix a panic case when GPU firmware failed to be loaded.)
dd4afb3691c7076cb3b9 (msm_kgsl: Remove REG_RBBM_PM_OVERRIDE1 from context switching)

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

Things to do:
-Cleanup of some unused definitions in the camera space

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-102710.zip
Download: boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-102710.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.35.7 – OC-UV-RAM-FP – Dream/Sapphire (32B/A)

-set COMPACTION to N in scropion and msm configs

-merged (from cyanogenmodcm-kernel):
bf0aece68e198f592721 (mm: Allow compaction without HugeTLB)
7afbbc5763a5b0a2e934 (msm_kgsl: Fix a panic case when GPU firmware failed to be loaded.)
dd4afb3691c7076cb3b9 (msm_kgsl: Remove REG_RBBM_PM_OVERRIDE1 from context switching)

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

Known Issues:
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.7_ds_32b-oc-uv-xtra-ram-fp-102710.zip
Download: boot-cm_2635.7_ds_32b-oc-uv-xtra-ram-fp-102710.zip

32A:
boot-cm_2635.7_ds_32a-oc-uv-xtra-ram-fp-102710.zip
Download: boot-cm_2635.7_ds_32a-oc-uv-xtra-ram-fp-102710.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

Kernel – 2.6.35.7 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-enable FAIR_SLEEPERS_INTERACTIVE, FAIR_SLEEPERS_TIMER, INT
ERACTIVE, INTERACTIVE_FORK_EXPEDITED, TIMER and TIMER_FORK_EXPEDITED

-set RWSEM_XCHGADD_ALGORITHM and CLASSIC_RCU. author: cyanogen. http://github.com/CyanogenMod/cm-kernel/commit/ce557b5f6bdd618a42758f68fd9bccb62ab97112

-merged (from intersectraven’s ir-kernel):
bb0e862e83a6a7420ec8 (writeback: balance_dirty_pages(): reduce calls to global_page_state)
568819ca4aeeab96029d (mm: implement writeback livelock avoidance using page tagging)
6690b1f9cb89bdf835f7 (radix-tree: omplement function radix_tree_range_tag_if_tagged)
ace0896d4a1bdc7b1217 (writeback: avoid unnecessary calculation of bdi dirty thresholds)
32e5354c15197bbfc78e (writeback: add comment to the dirty limit functions)
354ba5453a55843b2ee8 (writeback: don’t redirty tail an inode with dirty pages)
1313b84a33bb2c40537b (writeback: fix queue_io() ordering)
4d22fb29e56c833d5f03 (writeback: merge for_kupdate and !for_kupdate cases)
2669a2dd9496aea5045f (mm: fix writeback_in_progress())
e80a8571964d4c5f2db2 (vmscan: move referenced VM_EXEC pages to active list)

-merged (from cyanogenmod cm-kernel):
8d25cde172f5fac6dd09 (Optimized ARM RWSEM algorithm)
c4cfcd8ed94f18e575c2 (Add Classic and Preempt RCU support.)

-merged (from android.git.kernel.org common):
d4ffa5549ccc36673f90b6cec4ed7867be8c2bae ([ARM] fiq_debugger: Print local timer irqs count)
762476fa24df17914e1a8fab42e12d59da87539a (sdhci: Always pass clock request value zero to set_clock host op)

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

Things to do:
-Cleanup of some unused definitions in the camera space

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-102510.zip
Download: boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-102510.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.35.7 – OC-UV-RAM-FP – Dream/Sapphire (32B/A)

-enable FAIR_SLEEPERS_INTERACTIVE, FAIR_SLEEPERS_TIMER, INT
ERACTIVE, INTERACTIVE_FORK_EXPEDITED, TIMER and TIMER_FORK_EXPEDITED

-set RWSEM_XCHGADD_ALGORITHM and CLASSIC_RCU. author: cyanogen. http://github.com/CyanogenMod/cm-kernel/commit/ce557b5f6bdd618a42758f68fd9bccb62ab97112

-merged (from intersectraven’s ir-kernel):
bb0e862e83a6a7420ec8 (writeback: balance_dirty_pages(): reduce calls to global_page_state)
568819ca4aeeab96029d (mm: implement writeback livelock avoidance using page tagging)
6690b1f9cb89bdf835f7 (radix-tree: omplement function radix_tree_range_tag_if_tagged)
ace0896d4a1bdc7b1217 (writeback: avoid unnecessary calculation of bdi dirty thresholds)
32e5354c15197bbfc78e (writeback: add comment to the dirty limit functions)
354ba5453a55843b2ee8 (writeback: don’t redirty tail an inode with dirty pages)
1313b84a33bb2c40537b (writeback: fix queue_io() ordering)
4d22fb29e56c833d5f03 (writeback: merge for_kupdate and !for_kupdate cases)
2669a2dd9496aea5045f (mm: fix writeback_in_progress())
e80a8571964d4c5f2db2 (vmscan: move referenced VM_EXEC pages to active list)

-merged (from cyanogenmod cm-kernel):
8d25cde172f5fac6dd09 (Optimized ARM RWSEM algorithm)
c4cfcd8ed94f18e575c2 (Add Classic and Preempt RCU support.)

-merged (from android.git.kernel.org common):
d4ffa5549ccc36673f90b6cec4ed7867be8c2bae ([ARM] fiq_debugger: Print local timer irqs count)
762476fa24df17914e1a8fab42e12d59da87539a (sdhci: Always pass clock request value zero to set_clock host op)

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

Known Issues:
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.7_ds_32b-oc-uv-xtra-ram-fp-102510.zip
Download: boot-cm_2635.7_ds_32b-oc-uv-xtra-ram-fp-102510.zip

32A:
boot-cm_2635.7_ds_32a-oc-uv-xtra-ram-fp-102510.zip
Download: boot-cm_2635.7_ds_32a-oc-uv-xtra-ram-fp-102510.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

Kernel – 2.6.35.7 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-merged (from intersectraven ir-kernel):
8c2b39d2b7a04fcc62b0 (sched: do not consider SCHED_IDLE tasks to be cache hot)
91a60f293939aed884d3 (sched: set group_imb only a task can be pulled from the busiest cpu)
afd4e348c83409c2e711 (sched: drop group_capacity to 1 only if local group has extra capacity)
fad1d8360a221b84e998 (sched: force balancing on newidle balance if local group has capacity)
2411ec51065177b18599 (sched: remove accidental code addition)

-merged (from ezterry kernel-biff-testing):
68444e1e41f70ed68944 (HWPOISON: Stop shrinking at right page count)

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

Things to do:
-Cleanup of some unused definitions in the camera space

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-102410.zip
Download: boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-102410.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.35.7 – OC-UV-RAM-FP – Dream/Sapphire (32B/A)

-merged (from intersectraven’s ir-kernel):
8c2b39d2b7a04fcc62b0 (sched: do not consider SCHED_IDLE tasks to be cache hot)
91a60f293939aed884d3 (sched: set group_imb only a task can be pulled from the busiest cpu)
afd4e348c83409c2e711 (sched: drop group_capacity to 1 only if local group has extra capacity)
fad1d8360a221b84e998 (sched: force balancing on newidle balance if local group has capacity)
2411ec51065177b18599 (sched: remove accidental code addition)

-merged (from ezterry kernel-biff-testing):
1fd65679e0ccf83fd4eb (Try to make the new memory management more swap friendly)
68444e1e41f70ed68944 (HWPOISON: Stop shrinking at right page count)

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

Known Issues:
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.7_ds_32b-oc-uv-xtra-ram-fp-102410.zip
Download: boot-cm_2635.7_ds_32b-oc-uv-xtra-ram-fp-102410.zip

32A:
boot-cm_2635.7_ds_32a-oc-uv-xtra-ram-fp-102410.zip
Download: boot-cm_2635.7_ds_32a-oc-uv-xtra-ram-fp-102410.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

Kernel – 2.6.35.7 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

Update (filename has not changed; re-download and re-flash):
-disable FAIR_SLEEPERS, FAIR_SLEEPERS_INTERACTIVE, FAIR_SLEEPERS_TIMER, DYN_MIN_VRUNTIME, INTERACTIVE, INTERACTIVE_FORK_EXPEDITED, TIMER and TIMER_FORK_EXPEDITED

-revert (from kernel-2635 master):
e792624d6ad89d8507ae (Revert “sched: add Peter Ziljstra’s diminished granularity patch”)
…..

-merged (from cyanogenmod cm-kernel):
f0190c20793f2ebf4ccb (sched: fix string comparison in features)
2c4a8856c7c998c6beb6 (sched: debug spread check account for nr_running)
198a41363f6d6f97eba7 (sched: FAIR_SLEEPERS feature)
3c7b5eaefd12d3bffae3 (sched: debug cleanup place entity)
9fdc63b6809ae1d6de2f (sched buddy enable buddy logic starting at 2 running threads)
50da206fe95bd83d0141 (sched: dynamic min_vruntime)
26fde7e6ca15c0f62b0c (sched rename struct task in_iowait field to sched_in_iowait)
a7eda55b59655c801c5a (sched input interactivity-driven next buddy)
605c94ab15ea6a4f0ef5 (sched: timer-driven next buddy)
e9bf5a02c47a6ac97fd2 (sched: fork expedited)
066867e751e885507689 (sched: fair sleepers for timer and interactive)
bbbd090ed852510e4cb0 (sched: set sched_features.h per Mathieu Desnoyers)
3471b904f487635a9cac (sched: add Peter Ziljstra’s diminished granularity patch)
b44492ebb5f94b873787 (check_preempt_tick should not compare vruntime with wall time)

-revert (from cyanogenmod cm-kernel):
4224d92bc8cfe148ddf9 (Revert “sched: use the old min_vruntime when normalizing on dequeue”)

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

Things to do:
-Cleanup of some unused definitions in the camera space

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-102310.zip
Download: boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-102310.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.35.7 – OC-UV-RAM-FP – Dream/Sapphire (32B/A)

Update (filename has not changed; re-download and re-flash):
-disable FAIR_SLEEPERS, FAIR_SLEEPERS_INTERACTIVE, FAIR_SLEEPERS_TIMER, DYN_MIN_VRUNTIME, INTERACTIVE, INTERACTIVE_FORK_EXPEDITED, TIMER and TIMER_FORK_EXPEDITED

-revert (from kernel-2635 master):
e792624d6ad89d8507ae (Revert “sched: add Peter Ziljstra’s diminished granularity patch”)

…..

-merged (from cyanogenmod cm-kernel):
f0190c20793f2ebf4ccb (sched: fix string comparison in features)
2c4a8856c7c998c6beb6 (sched: debug spread check account for nr_running)
198a41363f6d6f97eba7 (sched: FAIR_SLEEPERS feature)
3c7b5eaefd12d3bffae3 (sched: debug cleanup place entity)
9fdc63b6809ae1d6de2f (sched buddy enable buddy logic starting at 2 running threads)
50da206fe95bd83d0141 (sched: dynamic min_vruntime)
26fde7e6ca15c0f62b0c (sched rename struct task in_iowait field to sched_in_iowait)
a7eda55b59655c801c5a (sched input interactivity-driven next buddy)
605c94ab15ea6a4f0ef5 (sched: timer-driven next buddy)
e9bf5a02c47a6ac97fd2 (sched: fork expedited)
066867e751e885507689 (sched: fair sleepers for timer and interactive)
bbbd090ed852510e4cb0 (sched: set sched_features.h per Mathieu Desnoyers)
3471b904f487635a9cac (sched: add Peter Ziljstra’s diminished granularity patch)
b44492ebb5f94b873787 (check_preempt_tick should not compare vruntime with wall time)

-revert (from cyanogenmod cm-kernel):
4224d92bc8cfe148ddf9 (Revert “sched: use the old min_vruntime when normalizing on dequeue”)

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

Known Issues:
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.7_ds_32b-oc-uv-xtra-ram-fp-102310.zip
Download: boot-cm_2635.7_ds_32b-oc-uv-xtra-ram-fp-102310.zip

32A:
boot-cm_2635.7_ds_32a-oc-uv-xtra-ram-fp-102310.zip
Download: boot-cm_2635.7_ds_32a-oc-uv-xtra-ram-fp-102310.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.