Kernel – 2.6.35.8 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-merged (from android.git.kernel.org common):
1da5d9e403728f2a4c5ec9be4f8766da4a23724e (ext4: fix kernel oops if the journal superblock has a non-zero j_errno)

-merged (from ezterry master):
9ab5a22d2c22bbc35799 (Reclaim missing 1MB of ram on EBI0 32B Sapphire ..)
e268608eac162798efbb (USB debug message …)

-rebase to kernel.org’s 2.6.35.8

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

Things to do:
-Cleanup of some unused definitions in the camera space

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.8-oc-uv-xtra-btn-aud-ram-neon_fp-103010.zip
Download: boot-cm_2635.8-oc-uv-xtra-btn-aud-ram-neon_fp-103010.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Leave a Reply