Recovery – ClockworkMod 6.0.3.4 (CM 10.2) – Nexus 7 Razor (Flo)

This is CWM for the Nexus 7 Razor (Flo).

This has been superseded by http://droidbasement.com/db-blog/?p=3132

-sync latest changes from CyanogenMod repo (cm-10.2)
-uses latest published kernel source.

Known Issues:
-When performing a long list in /data/media within the shell, this is thrown from Bionic, for localtime/GMT/posixrules:
“couldn’t find any tzdata”. However, the listing is still shown.

—–

Download (Nexus 7 Razor (Flo)):
recovery.tar.md5
Download: recovery_flo.img

—–

Source:
https://github.com/pershoot/android_device_asus_flo
https://github.com/pershoot/android_kernel_asus_flo
https://github.com/CyanogenMod/android_bootable_recovery

——–

Installation instructions:

Fastboot:
Go in to fastboot mode:
To boot the recovery:
fastboot boot recovery_flo.img

To permanently flash the recovery:
fastboot flash recovery recovery_flo.img

Firmware – Android 4.3 – OTA – Nexus 7 Razor (Flo)

This is a flashable (in ClockWorkMod Recovery (http://droidbasement.com/db-blog/?p=3110)) Android 4.3 OTA image (JSS15J) for the Nexus 7 Razor (Flo).

Download:
jb-4.3_ota-full_n7_razor-flo.zip (to be flashed in CWM)
Download: jb-4.3_ota-full_n7_razor-flo.zip

Stock Recovery (Boot/flash it using fastboot):
recovery.img
Download: recovery.img

Installation Instructions:
Enter fastboot mode

fastboot boot recovery_flo.img (http://droidbasement.com/db-blog/?p=3110)
adb push FILE /data/media/

Flash.

Firmware – CyanogenMod 10 – Galaxy Tab 10.1

Here are some UNOFFICIAL builds that were ran off this morning (7/25).

This is JellyBean 4.1.2 (JZ054K).

Changes from the last UNOFFICIAL release (07/14):

Kernel:
Revert “video: tegra: dc: add tracing information”
-drivers: tegra: host: remove tracing
Revert “video: tegra: dc: Fix the check of dirty window.”
Revert “video: tegra: dc: fix bug causing drawing before flipping”

Device specific:
p4wifi:
-system: update kernel/wifi
-p4wifi: enable in-line kernel building

p4vzw:
-system: update kernel/wifi
-p4vzw: enable in-line kernel building

p4tmo:
-system: update kernel/wifi
-p4tmo: enable in-line kernel building

p4:
-system: update kernel/wifi
-p4: enable in-line kernel building

p3:
-system: update kernel/wifi
-p3: enable in-line kernel building

Vendor specific:
N/A

Rom Base:
Sync’d as of ~1.00AM (7/25), Eastern.

Recovery:
Built recovery (in the folder) is CWM 6.0.2.8.

Note:
-This build contains the current development kernel (3.1.10; 7/14).
-For P3: If you use GAPPS, then you must use a smaller gapps package. You can find one here: http://forum.xda-developers.com/showpost.php?p=34791713&postcount=976
-Do not update Search from Play (Market), otherwise Search/Google Now will crash.

…..

Known Issues:
-Wallpaper will be shifted downward when applied (Trebuchet).
-WiFi direct is not fully operational (i.e doesn’t appear to work with a n4 but has been reported to work with an n10).

Enjoy!

For:
GT-P7100 (p3), GT-P7500 (p4), GT-P7510 (p4wifi), SCH-I905 (p4vzw) and SGH-T859 (p4tmo)

Note:
-Use the supplied recovery (in the folder (use Odin 1.85 to flash it)), if you are not on a compatible/recent recovery.
-For P4VZW: You must be on stock ICS (and it’s modem) before flashing to this build, for LTE functionality
-For P4WIFI UK: You must be on the US ICS bootloader (odin .tar.md5 inside the .zip in the folder), otherwise you may incur a rolling screen
-For P4: You must be on the UK ICS bootloader (odin .tar.md5 from UK inside the folder), otherwise you may incur a rolling screen.
-For P3: It is advised to be on P4’s ICS modem for best results.
-For P4*: You must be on the ICS modem for best results.

…..

Installation Instructions:
-Flash CWM 6.0.2.8 in Download Mode via Odin 1.85 (PDA field)
-Boot CWM

If you are coming from CM 10.1, from another OS/Rom or have a P3 and have had another GAPPS installed (then the one listed above):
-Format /system

-Flash rom

-If you use GAPPS (P4 only; P3 will use minimal GAPPS (above)), you can use 10/11 from goo.

If you are coming from CM 10.1 or another OS/Rom:
-Wipe in CWM

-Reboot

…..

P4WIFI: http://droidbasement.com/galaxy/roms/cm10/p4wifi

P4VZW: http://droidbasement.com/galaxy/roms/cm10/p4vzw

P4TMO: http://droidbasement.com/galaxy/roms/cm10/p4tmo

P4: http://droidbasement.com/galaxy/roms/cm10/p4

P3: http://droidbasement.com/galaxy/roms/cm10/p3

…..

Source: https://github.com/cyanogenmod, https://github.com/pershoot

Recovery – ClockworkMod 6.0.3.4 (CM 10.1) – Galaxy Tab 10.1

This is intended to be used with an installation of CM 10.1 (4.2.2).

-sync latest changes from CyanogenMod repo (cm-10.1)
-uses latest published kernel for all devices.

Further device specific changes:
p4-common:
-recovery: set bootloader to download mode (advanced)

p4wifi/p4vzw/p4tmo/p4/p3:
-system: update kernel/wifi
-enable in-line kernel building

Note:
Models with a radio will not have that partition available.

—–

Download WIFI (Odin; GT-P7510):
recovery.tar.md5
Download: recovery.tar.md5

Download LTE (Odin; SCH-I905):
recovery.tar.md5
Download: recovery.tar.md5

Download TMO (Odin; SGH-T859):
recovery.tar.md5
Download: recovery.tar.md5

Download P4 (Odin; GT-P7500):
recovery.tar.md5
Download: recovery.tar.md5

Download P3 (Odin; GT-P7100):
recovery.tar.md5
Download: recovery.tar.md5

—–

Source:
https://github.com/pershoot/android_device_samsung_p4wifi
https://github.com/pershoot/android_device_samsung_p4vzw
https://github.com/pershoot/android_device_samsung_p4tmo
https://github.com/pershoot/android_device_samsung_p4
https://github.com/pershoot/android_device_samsung_p3
https://github.com/pershoot/android_vendor_cyanogen
https://github.com/CyanogenMod/android_vendor_cyanogen
https://github.com/CyanogenMod/android_bootable_recovery

——–

Installation instructions:

Odin:
Go in to download mode, launch Odin Multi Download, select recovery.tar.md5 (PDA slot) and flash.

Firmware – CyanogenMod 10 – Galaxy Tab 10.1

Here are some UNOFFICIAL builds that were ran off this morning (7/14).

This is JellyBean 4.1.2 (JZ054K).

Changes from the last UNOFFICIAL release (06/29):

Kernel:
perf: Treat attr.config as u64 in perf_swevent_init()
-drivers: modem_if: omit cbp71_force_crash_exit for P4LTE
net: force a reload of first item in hlist_nulls_for_each_entry_rcu

Device specific:
p4wifi:
-system: update kernel/wifi

p4vzw:
-system: update kernel/wifi

p4tmo:
-system: update kernel/wifi

p4:
-system: update kernel/wifi

p3:
-system: update kernel/wifi

Vendor specific:
N/A

Rom Base:
Sync’d as of ~9.00AM (7/14), Eastern.

Recovery:
Built recovery (in the folder) is CWM 6.0.2.8.

Note:
-This build contains the current development kernel (3.1.10; 7/14).
-For P3: If you use GAPPS, then you must use a smaller gapps package. You can find one here: http://forum.xda-developers.com/showpost.php?p=34791713&postcount=976
-Do not update Search from Play (Market), otherwise Search/Google Now will crash.

…..

Known Issues:
-Wallpaper will be shifted downward when applied (Trebuchet).
-WiFi direct is not fully operational (i.e doesn’t appear to work with a n4 but has been reported to work with an n10).

Enjoy!

For:
GT-P7100 (p3), GT-P7500 (p4), GT-P7510 (p4wifi), SCH-I905 (p4vzw) and SGH-T859 (p4tmo)

Note:
-Use the supplied recovery (in the folder (use Odin 1.85 to flash it)), if you are not on a compatible/recent recovery.
-For P4VZW: You must be on stock ICS (and it’s modem) before flashing to this build, for LTE functionality
-For P4WIFI UK: You must be on the US ICS bootloader (odin .tar.md5 inside the .zip in the folder), otherwise you may incur a rolling screen
-For P4: You must be on the UK ICS bootloader (odin .tar.md5 from UK inside the folder), otherwise you may incur a rolling screen.
-For P3: It is advised to be on P4’s ICS modem for best results.
-For P4*: You must be on the ICS modem for best results.

…..

Installation Instructions:
-Flash CWM 6.0.2.8 in Download Mode via Odin 1.85 (PDA field)
-Boot CWM

If you are coming from CM 10.1, from another OS/Rom or have a P3 and have had another GAPPS installed (then the one listed above):
-Format /system

-Flash rom

-If you use GAPPS (P4 only; P3 will use minimal GAPPS (above)), you can use 10/11 from goo.

If you are coming from CM 10.1 or another OS/Rom:
-Wipe in CWM

-Reboot

…..

P4WIFI: http://droidbasement.com/galaxy/roms/cm10/p4wifi

P4VZW: http://droidbasement.com/galaxy/roms/cm10/p4vzw

P4TMO: http://droidbasement.com/galaxy/roms/cm10/p4tmo

P4: http://droidbasement.com/galaxy/roms/cm10/p4

P3: http://droidbasement.com/galaxy/roms/cm10/p3

…..

Source: https://github.com/cyanogenmod, https://github.com/pershoot

Recovery – ClockworkMod 6.0.3.3 (CM 10.1) – Galaxy Tab 10.1

This is intended to be used with an installation of CM 10.1 (4.2.2).

This has been superseded by http://droidbasement.com/db-blog/?p=3103

-sync latest changes from CyanogenMod repo (cm-10.1)
-uses latest published kernel for all devices.

Note:
Models with a radio will not have that partition available.

—–

Download WIFI (Odin; GT-P7510):
recovery.tar.md5
Download: recovery.tar.md5

Download LTE (Odin; SCH-I905):
recovery.tar.md5
Download: recovery.tar.md5

Download TMO (Odin; SGH-T859):
recovery.tar.md5
Download: recovery.tar.md5

Download P4 (Odin; GT-P7500):
recovery.tar.md5
Download: recovery.tar.md5

Download P3 (Odin; GT-P7100):
recovery.tar.md5
Download: recovery.tar.md5

—–

Source:
https://github.com/pershoot/android_device_samsung_p4wifi
https://github.com/pershoot/android_device_samsung_p4vzw
https://github.com/pershoot/android_device_samsung_p4tmo
https://github.com/pershoot/android_device_samsung_p4
https://github.com/pershoot/android_device_samsung_p3
https://github.com/pershoot/android_vendor_cyanogen
https://github.com/CyanogenMod/android_vendor_cyanogen
https://github.com/CyanogenMod/android_bootable_recovery

——–

Installation instructions:

Odin:
Go in to download mode, launch Odin Multi Download, select recovery.tar.md5 (PDA slot) and flash.

Recovery – ClockworkMod 6.0.3.2 (CM 10.1) – Galaxy Tab 10.1

This is intended to be used with an installation of CM 10.1 (4.2.2).

This has been superseded by: http://droidbasement.com/db-blog/?p=3089

-sync latest changes from CyanogenMod repo (cm-10.1)
-uses latest published kernel for all devices.

Note:
Models with a radio will not have that partition available.

—–

Download WIFI (Odin; GT-P7510):
recovery.tar.md5
Download: recovery.tar.md5

Download LTE (Odin; SCH-I905):
recovery.tar.md5
Download: recovery.tar.md5

Download TMO (Odin; SGH-T859):
recovery.tar.md5
Download: recovery.tar.md5

Download P4 (Odin; GT-P7500):
recovery.tar.md5
Download: recovery.tar.md5

Download P3 (Odin; GT-P7100):
recovery.tar.md5
Download: recovery.tar.md5

—–

Source:
https://github.com/pershoot/android_device_samsung_p4wifi
https://github.com/pershoot/android_device_samsung_p4vzw
https://github.com/pershoot/android_device_samsung_p4tmo
https://github.com/pershoot/android_device_samsung_p4
https://github.com/pershoot/android_device_samsung_p3
https://github.com/pershoot/android_vendor_cyanogen
https://github.com/CyanogenMod/android_vendor_cyanogen
https://github.com/CyanogenMod/android_bootable_recovery

——–

Installation instructions:

Odin:
Go in to download mode, launch Odin Multi Download, select recovery.tar.md5 (PDA slot) and flash.