-merged up to kernel.org’s 2.6.32.40
-Revert “cpufreq: Prevent memory leak in cpufreq_stats on hotplug”
-defconfig: regen for .40, set EVENTFD, enable CGROUPS and enable CPU_FREQ_STAT
-defconfig: unset TREE_RCU and set TREE_PREEMPT_RCU
-defconfig: enable BLK_DEV_CRYPTOLOOP
-merged (from android.git.kernel.org common):
net: wireless: bcm4329: Add new and default wifi locale support
net: wireless: bcm4329: Reduce listen interval to 10 (from 20)
-merged (from cyanogenmod lge-kernel-star):
tegra: Add prototypes for subsystem suspend functions
clocksource: Provide a generic mult/shift factor calculation
clocksource: Add clocksource_register_hz/khz interface
[ARM] tegra: timer: Add suspend wakeup and 32khz timers
ARM: tegra: timer: Remove 32k clocksource
ARM: tegra: timer: Fix us timer time after resume from LP1
ARM: tegra: timer: Separate clocksource and sched_clock
ARM: SMP: remove per_cpu based spinlock in do_IPI()
tracing/sched: Make preempt_schedule() notrace
rcu: Introduce lockdep-based checking to RCU read-side primitives
rcu: Add lockdep-enabled variants of rcu_dereference()
sysdev: Pass attribute in sysdev_class attributes show/store
sched: Cleanup: remove unused variable in try_to_wake_up()
sched: Rate-limit nohz
fat: Fix stat->f_namelen
timer: Added usleep[_range] timer
posix_timer: Move copy_to_user(created_timer_id) down in timer_create()
time: Implement timespec_add
clocksource: Add __clocksource_updatefreq_hz/khz methods
cgroups: Add an API to attach a task to current task’s cgroup
clockevents: Remove the per cpu tick skew
timer: add on-stack deferrable timer interfaces
cgroupfs: create /sys/fs/cgroup to mount cgroupfs on
sched: Drop all load weight manipulation for RT tasks
nohz: Fix nohz ratelimit
If you are using any of the external modules, please download them fresh and re-push them in to place.
Note:
-If you are on the stock rom/stock’ish rom (froyo), set your wifi to never sleep.
-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock/stock’ish rom).
Known Issues:
-warning from manage irq and nvec release function
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.
Things to do:
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch
——–
-XTRA contains:
*ondemand governor default
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied
ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.40-oc-uv-xtra-vfpv3_fp-051311.zip
Download: boot-cm_2632.40-oc-uv-xtra-vfp_fp-051311.zip
lib-2632.40.tar.gz (kernel modules)
Download: lib-2632.40.tar.gz
ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.40_gb-oc-uv-xtra-vfp_fp-051311.zip
Download: boot-cm_2632.40_gb-oc-uv-xtra-vfp_fp-051311.zip
lib-2632.40_gb.tar.gz (kernel modules)
Download: lib-2632.40_gb.tar.gz
Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)
ViewSonic Gtab/Malata Zpad [New Bootloader] (Froyo):
boot-cm_2632.40_newbl-oc-uv-xtra-vfp_fp-051311.zip
Download: boot-cm_2632.40_newbl-oc-uv-xtra-vfp_fp-051311.zip
lib-2632.40.tar.gz (kernel modules)
Download: lib-2632.40.tar.gz
ViewSonic Gtab/Malata Zpad [New Bootloader] (Gingerbread):
boot-cm_2632.40_gb_newbl-oc-uv-xtra-vfp_fp-051311.zip
Download: boot-cm_2632.40_gb_newbl-oc-uv-xtra-vfp_fp-051311.zip
lib-2632.40_gb.tar.gz (kernel modules)
Download: lib-2632.40_gb.tar.gz
——–
Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30
http://github.com/CyanogenMod/cm-kernel
https://github.com/CyanogenMod/lge-kernel-star
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.36
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/mblaster/linux_2.6.32_folio100
https://github.com/Cpasjuste/android_kernel_lg_p990
https://github.com/Kali-/htc-kernel-msm7x30
http://android.git.kernel.org/?p=kernel/msm.git;a=summary
——–
Instructions:
Flash the .zip through recovery
To use one of the kernel modules:
Pull the one you want from lib-2632.40.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.40-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.40-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.40-cyanogenmod/MODULE.ko
Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.
Overclocking-
How-To:
-Install the latest SetCPU (2.11a is current) from the market and/or XDA (http://forum.xda-developers.com/showthread.php?t=505419)
-Select auto
-If using CM7, then you can use the included CPU Settings within CyanogenMod Settings.
Note:
If you were using SetCPU prior, with ‘custom’ and this kernel set, please go to device selection and select auto. Please delete the custom setcpu file on your filesystem:
adb shell rm /data/local/setcpu
Note2:
Be aware, that if you leave it pinned to max, hammering it, it will get warm/warmer then your used to at 1GHZ, pinned.
It is advised not to select any of the 2 governor’s listed (but, at the very least, not performance).
It is advised to keep your min value at 216.
