-port bzo’s force turbo_mode patch

Note:
Known Issues:
Cannot unmount /sdcard cleanly once mounted to your computer, requiring a reboot

——–

32B:
boot-cm_2634_ds_32b-oc-uv-fp-053010.zip
Download: boot-cm_2634_ds_32b-oc-uv-fp-053010.zip

boot-cm_2634_ds_32b-oc-uv-xtra-fp-053010.zip
Download: boot-cm_2634_ds_32b-oc-uv-xtra-fp-053010.zip

32A:
boot-cm_2634_ds_32a-oc-uv-fp-053010.zip
Download: boot-cm_2634_ds_32a-oc-uv-fp-053010.zip

boot-cm_2634_ds_32a-oc-uv-xtra-fp-053010.zip
Download: boot-cm_2634_ds_32a-oc-uv-xtra-fp-053010.zip

——–

Source:
http://github.com/cyanogen/cm-kernel
http://github.com/pershoot/ds-kernel
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 1.54 (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

ADW Launcher (almostNexus mod) 0.7 (rc2), by Anderwebs

-Compatible with CM5.0.7
-last github source commit: 05/21/10

adwlauncher_0.7-ds-052910.zip
Download: adwlauncher_0.7-ds-052910

——

Source:
http://github.com/AnderWeb/android_packages_apps_Launcher

——

Instructions:
Flash the .zip through recovery

JIT for CM5.0.7 – Dream/Sapphire

-built against latest CM Source

Note:
Nothing has changed in reference to JIT

JIT-CM5.0.7-ds-052910.zip
Download: JIT-CM5.0.7-ds-052910.zip

Note:
This is probably not stable/not stable for the longhaul. If you flash this, do not file any bug reports, until you flash back to the stock rom and observe.

——

Source:
http://github.com/cyanogen/android_dalvik

——

Instructions:
Flash the .zip through recovery

JIT for CM5.0.7

-built against latest CM source

Note:
Nothing has changed in reference to JIT

Note 2:
This is probably not stable/not stable for the longhaul. If you flash this, do not file any bug reports, until you flash back to the stock rom and observe.

JIT-CM5.0.7-n1-052910.zip
Download: JIT-CM5.0.7-n1-052910.zip

——

Source:
http://github.com/cyanogen/android_dalvik

——

Instructions:
Flash the .zip through recovery

ADW Launcher (almostNexus mod) 0.7 (rc2), by Anderwebs

-Compatible with CM5.0.7
-modified to use /data/data/com.android.launcher2 (pershoot)
-last github source commit: 05/21/10

adwlauncher_0.7-n1-052910.zip
Download: adwlauncher_0.7-n1-052910

——

Source:
http://github.com/AnderWeb/android_packages_apps_Launcher

——

Instructions:
Flash the .zip through recovery

-rebase to kernel.org’s 2.6.33.5

Note:
You cannot use this on Android 2.2 (Froyo) and use video recording.

-reverted commits (this wifi module (which is the older version) is in the update.zip format files)):
94a9b1fc8f1feba5bc3a (net: wireless: bcm4329: Add “getpower” support)
6723b3a4ce7909d5014f (net: wireless: bcm4329: Add FW crash trap debug)
27dd25f80402a13f9d5c (net: wireless: bcm4329: Fix dhd_os_wd_timer if bus is down )
1490683fb851b992722c (net: wireless: bcm4329: Fix AP interface processing and removal)
f2513498e961966d3209 (net: wireless: bcm4329: Update to Ver 4.218.209)

Note:
If you would like to try the newer version wifi module (Ver 4.218.209 (commits: 94a9b1fc8f1feba5bc3a, 6723b3a4ce7909d5014f, f2513498e961966d3209, 1490683fb851b992722c, and 27dd25f80402a13f9d5c)), push the bcm4329.ko module contained within this .zip to /system/lib/modules:

wifi-4.218.209-NEW-052810.zip (Ver 4.218.209)
Download: wifi-4.218.209-NEW-052810.zip

Note:
-Do not use this kernel set if you are on CM5.0.6

——–

CM5.0.5.x and CM5.0.7.x:
boot-cm_2633.5-oc-uv-btn-aud-ram-neon_fp-052810.zip
Download: boot-cm_2633.5-oc-uv-btn-aud-ram-neon_fp-052810.zip

boot-cm_2633.5-oc-uv-xtra-btn-aud-ram-neon_fp-052810.zip
Download: boot-cm_2633.5-oc-uv-xtra-btn-aud-ram-neon_fp-052810.zip

——–

Source:
http://github.com/cyanogen/cm-kernel
http://github.com/pershoot/nexus-kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.33.y.git;a=summary
http://android.git.kernel.org/?p=kernel/msm.git

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

-set DM_CRYPT_GLOBAL_WORKQUEUES

merged in (from Cyanogen’s cm-kernel github):
48ed457818af2e0005a0 (msm: audio: 7k: Remove unnecessary call to sched_setscheduler)
2c28c47228e468dbed74 (msm: adsp: Fix to release adsp_write_lock if queue validation fails)
65f9da02ae833fd2759 (Revert [ARM] msm: usb: reset the PHY before suspend)
b46cbbf3343d8064e3d9 ([ARM] msm: trout: specify panel vsync gpio irq)
2ebb60ad69127fec145b ([ARM] video: msm: remove nt35399 mddi client driver)
47beaee72d81f32cbd80 ([ARM] video: msm: rename dummy mddi client to simple)
2ce40b591bfa73150ffe ([ARM] video: msm: add vsync irq resource to mddi client pdev if present)
3abc882259c40e2022b1 (md: dm-crypt: Add option to re-use a new global work-queue)

Note:
Known Issues:
Cannot unmount /sdcard cleanly once mounted to your computer, requiring a reboot

——–

32B:
boot-cm_2634_ds_32b-oc-uv-fp-052710.zip
Download: boot-cm_2634_ds_32b-oc-uv-fp-052710.zip

boot-cm_2634_ds_32b-oc-uv-xtra-fp-052710.zip
Download: boot-cm_2634_ds_32b-oc-uv-xtra-fp-052710.zip

32A:
boot-cm_2634_ds_32a-oc-uv-fp-052710.zip
Download: boot-cm_2634_ds_32a-oc-uv-fp-052710.zip

boot-cm_2634_ds_32a-oc-uv-xtra-fp-052710.zip
Download: boot-cm_2634_ds_32a-oc-uv-xtra-fp-052710.zip

——–

Source:
http://github.com/cyanogen/cm-kernel
http://github.com/pershoot/ds-kernel
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 1.54 (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

-source refreshed from Cyanogen’s cm-kernel github (android-msm-2.6.33 branch; last commit: about 3 days ago)
-Adjust HW_SPEAKER for phone in-call
-set DM_CRYPT_GLOBAL_WORKQUEUES

-merged in (from Cyanogen’s cm-kernel github):
2a672a2ce8273ee684d7 (Revert hack: Replace calls to dmac_inv_range with a WARN to allow compiling msm_camera)
47560cf28d6597e8a002 ([ARM] msm: camera: Invalidate cache for preview and stats buffers)
9c7dbba00df1c7b6cd76 ([ARM] video: msm: make toshiba mddi bridge use the vsync irq resource)
2ebb60ad69127fec145b ([ARM] video: msm: remove nt35399 mddi client driver)
d7095c0737906468ca84 ([ARM] video: msm: add basic bridge support to simple mddi client)
47beaee72d81f32cbd80 ([ARM] video: msm: rename dummy mddi client to simple)
2ce40b591bfa73150ffe ([ARM] video: msm: add vsync irq resource to mddi client pdev if present)
00a7456607d967da5906 ([ARM] msm: fb: let board specify vsync irq, panel caps for mddi)
765f9da02ae833fd2759 (Revert [ARM] msm: usb: reset the PHY before suspend)

Note:
You cannot use this on Android 2.2 (Froyo) and use video recording.

-reverted commits (this wifi module (which is the older version) is in the update.zip format files):
94a9b1fc8f1feba5bc3a (net: wireless: bcm4329: Add “getpower” support)
6723b3a4ce7909d5014f (net: wireless: bcm4329: Add FW crash trap debug)
27dd25f80402a13f9d5c (net: wireless: bcm4329: Fix dhd_os_wd_timer if bus is down )
1490683fb851b992722c (net: wireless: bcm4329: Fix AP interface processing and removal)
f2513498e961966d3209 (net: wireless: bcm4329: Update to Ver 4.218.209)

Note:
If you would like to try the newer version wifi module (Ver 4.218.209 (commits: 94a9b1fc8f1feba5bc3a, 6723b3a4ce7909d5014f, f2513498e961966d3209, 1490683fb851b992722c, and 27dd25f80402a13f9d5c)), push the bcm4329.ko module contained within this .zip to /system/lib/modules:

wifi-4.218.209-NEW-052710.zip (Ver 4.218.209)
Download: wifi-4.218.209-NEW-052710.zip

Note:
-Do not use this kernel set if you are on CM5.0.6

——–

CM5.0.5.x and CM5.0.7.x:
boot-cm_2633.4-oc-uv-btn-aud-ram-neon_fp-052710.zip
Download: boot-cm_2633.4-oc-uv-btn-aud-ram-neon_fp-052710.zip

boot-cm_2633.4-oc-uv-xtra-btn-aud-ram-neon_fp-052710.zip
Download: boot-cm_2633.4-oc-uv-xtra-btn-aud-ram-neon_fp-052710.zip

——–

Source:
http://github.com/cyanogen/cm-kernel
http://github.com/pershoot/nexus-kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.33.y.git;a=summary
http://android.git.kernel.org/?p=kernel/msm.git

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

-Adjust HW_SPEAKER for phone in-call
-Revert back to new Q6VENC module for building
-set DM_CRYPT_GLOBAL_WORKQUEUES

merged in (from Cyanogen’s cm-kernel github):
765f9da02ae833fd2759 (Revert [ARM] msm: usb: reset the PHY before suspend)
3abc882259c40e2022b1 (md: dm-crypt: Add option to re-use a new global work-queue)
00a7456607d967da5906 ([ARM] msm: fb: let board specify vsync irq, panel caps for mddi)
2ce40b591bfa73150ffe ([ARM] video: msm: add vsync irq resource to mddi client pdev if present)
47beaee72d81f32cbd80 ([ARM] video: msm: rename dummy mddi client to simple)
d7095c0737906468ca84 ([ARM] video: msm: add basic bridge support to simple mddi client)
2ebb60ad69127fec145b ([ARM] video: msm: remove nt35399 mddi client driver)
9c7dbba00df1c7b6cd76 ([ARM] video: msm: make toshiba mddi bridge use the vsync irq resource)

Note:
Known Issues:
-Cannot unmount /sdcard cleanly once mounted to your computer, requiring a reboot.
-Video camcorder will not work unless you are using Android 2.2 (Froyo) and its associated radio
-FC on Goggles when running on Android 2.2 (Froyo)

Note:
The wifi module in the update.zip format files is the new one (Version: 4.218.209)
If you would like to try the older version wifi module (more details: ?p=410), push the bcm4329.ko module contained within this .zip to /system/lib/modules:

wifi-OLD.zip
Download: wifi-OLD.zip

-Do not use this kernel set if you are on CM5.0.6

——–

CM5.0.5.x, CM5.0.7.x and Android 2.2 (Froyo):
boot-cm_2634-oc-uv-btn-aud-ram-neon_fp-052710.zip
Download: boot-cm_2634-oc-uv-btn-aud-ram-neon_fp-052710.zip

boot-cm_2634-oc-uv-xtra-btn-aud-ram-neon_fp-052710.zip
Download: boot-cm_2634-oc-uv-xtra-btn-aud-ram-neon_fp-052710.zip

——–

Source:
http://github.com/cyanogen/cm-kernel
http://github.com/pershoot/nexus-kernel
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

-refreshed source from Cyanogen’s cm-kernel github (android-msm-2.6.33 branch; last commit: about 10 hours ago)
-rebase to android experimental’s 2.6.34-test2 (android-msm-2.6.34-test2 branch; last commit: about 3 days ago)
-base config from current CM github and residual mahimahi defaults from android experimental’s github
-Enable AKM8973 and A1026 modules for building
-Set DISABLE_TAGS_ECC for YAFFS
-Adjust HW_SPEAKER for phone in-call
-Use Q6VENC module from 2.6.33.4 for building

Note:
Known Issues:
Cannot unmount /sdcard cleanly once mounted to your computer, requiring a reboot.
Video camcorder still undergoes an FC issue after a few seconds.

-The wifi module in the update.zip format files is the older one, and is the one from: ?p=410

Note:
If you would like to try the newer version wifi module (Ver 4.218.209 (more details: ?p=410), push the bcm4329.ko module contained within this .zip to /system/lib/modules:

wifi-4.218.209-NEW-052310.zip (Ver 4.218.209)
Download: wifi-4.218.209-NEW-052310.zip

——–

CM5.0.5.x and CM5.0.7-T Series:
boot-cm_2634-oc-uv-btn-aud-ram-neon_fp-052310.zip
Download: boot-cm_2634-oc-uv-btn-aud-ram-neon_fp-052310.zip

boot-cm_2634-oc-uv-xtra-btn-aud-ram-neon_fp-052310.zip
Download: boot-cm_2634-oc-uv-xtra-btn-aud-ram-neon_fp-052310.zip

<><><>

CM5.0.6:
boot-cm_2634-oc-uv-btn-aud-ram-vfp_fp-052310.zip
Download: boot-cm_2633.4-oc-uv-btn-aud-ram-vfp_fp-052310.zip

boot-cm_2634-oc-uv-xtra-btn-aud-ram-vfp_fp-052310.zip
Download: boot-cm_2634-oc-uv-xtra-btn-aud-ram-vfp_fp-052310.zip

——–

Source:
http://github.com/cyanogen/cm-kernel
http://github.com/pershoot/nexus-kernel
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor