Kernel – 2.6.35.4 – OC-UV-FP – Dream/Sapphire (32B/A)

-merged (from cyanogenmod’s cm-kernel github):
1e4197164e85e6b8a161 (ARM: MSM: Fix on build warning regarding VMALLOC_END type)
41a241d56d3e14ca7e09 (VIDEO: MSM: Fix memory leak in mdp_probe)

Update:
-merged (from android.git.kernel.org’s common github):
0d83faa2f1e19cfec4b90dc34ebb99a740004c09 (fs: partitions: Add support for named partitions)
f4609ba1d8444d7c348d6411e3b8c4f22ca3cbbb (EFI/GPT: Register named partitions.)
6e423f9725fdd63f98297c249a7396f67a498d8c (mmc_block: Allow more than 8 partitions per card)

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

Known Issues:
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.4_ds_32b-oc-uv-xtra-fp-090310.zip
Download: boot-cm_2635.4_ds_32b-oc-uv-xtra-fp-090310.zip

32A:
boot-cm_2635.4_ds_32a-oc-uv-xtra-fp-090310.zip
Download: boot-cm_2635.4_ds_32a-oc-uv-xtra-fp-090310.zip

——–

Source:
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

Kernel – 2.6.34.6 – OC-UV-FP – Dream/Sapphire (32B/A)

-merged (from cyanogenmod’s cm-kernel github):
1e4197164e85e6b8a161 (ARM: MSM: Fix on build warning regarding VMALLOC_END type)
41a241d56d3e14ca7e09 (VIDEO: MSM: Fix memory leak in mdp_probe)

Update:
-merged (from android.git.kernel.org’s common github):
0d83faa2f1e19cfec4b90dc34ebb99a740004c09 (fs: partitions: Add support for named partitions)
f4609ba1d8444d7c348d6411e3b8c4f22ca3cbbb (EFI/GPT: Register named partitions.)
6e423f9725fdd63f98297c249a7396f67a498d8c (mmc_block: Allow more than 8 partitions per card)

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2634.6_ds_32b-oc-uv-fp-090310.zip
Download: boot-cm_2634.6_ds_32b-oc-uv-fp-090310.zip

boot-cm_2634.6_ds_32b-oc-uv-xtra-fp-090310.zip
Download: boot-cm_2634.6_ds_32b-oc-uv-xtra-fp-090310.zip

32A:
boot-cm_2634.6_ds_32a-oc-uv-fp-090310.zip
Download: boot-cm_2634.6_ds_32a-oc-uv-fp-090310.zip

boot-cm_2634.6_ds_32a-oc-uv-xtra-fp-090310.zip
Download: boot-cm_2634.6_ds_32a-oc-uv-xtra-fp-090310.zip

——–

Source:
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

Kernel – 2.6.35.4 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-remove unset_supplies and add further logic (taken from 2.6.34) for additions within consumer devices, to unset the device_supply/supplies and scrub (core.c)

-merged (from cyanogenmod’s cm-kernel github):
cbf56f181d478509ab9b (net: wireless: bcm4329: Fix HW_OOB interrupt processing)
0bdad955a49f09730976 ([ARM] msm: mahimahi: Switch to level interrupt for wlan)
070a1a46ca8081d0ab3d ([ARM] msm: mahimahi: wlan: Fix BT-coex in A2DP mode)

-merged (from android.git.kernel.org’s common github):
1e3b38346e852e3f7d6b255a290611afecf083e3 (net: wireless: bcm4329: Update to Version 4.218.248)
cad1cba5e8143433b299d74d209956fd95a37109 (net: wireless: bcm4329: Fix roaming failure case)

Update:
-merged (from android.git.kernel.org’s common github):
0d83faa2f1e19cfec4b90dc34ebb99a740004c09 (fs: partitions: Add support for named partitions)
f4609ba1d8444d7c348d6411e3b8c4f22ca3cbbb (EFI/GPT: Register named partitions.)
6e423f9725fdd63f98297c249a7396f67a498d8c (mmc_block: Allow more than 8 partitions per card)

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

Things to do:
-Cleanup of some unused definitions in the camera space

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.4-oc-uv-xtra-btn-aud-ram-neon_fp-090310.zip
Download: boot-cm_2635.4-oc-uv-xtra-btn-aud-ram-neon_fp-090310.zip

——–

Source:
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.34.6 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-merged (from cyanogenmod’s cm-kernel github):
cbf56f181d478509ab9b (net: wireless: bcm4329: Fix HW_OOB interrupt processing)
0bdad955a49f09730976 ([ARM] msm: mahimahi: Switch to level interrupt for wlan)
070a1a46ca8081d0ab3d ([ARM] msm: mahimahi: wlan: Fix BT-coex in A2DP mode)

-merged (from android.git.kernel.org’s common github):
1e3b38346e852e3f7d6b255a290611afecf083e3 (net: wireless: bcm4329: Update to Version 4.218.248)
cad1cba5e8143433b299d74d209956fd95a37109 (net: wireless: bcm4329: Fix roaming failure case)

Update:
-merged (from android.git.kernel.org’s common github):
0d83faa2f1e19cfec4b90dc34ebb99a740004c09 (fs: partitions: Add support for named partitions)
f4609ba1d8444d7c348d6411e3b8c4f22ca3cbbb (EFI/GPT: Register named partitions.)
6e423f9725fdd63f98297c249a7396f67a498d8c (mmc_block: Allow more than 8 partitions per card)

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430972, 458693 and 460075 applied

boot-cm_2634.6-oc-uv-btn-aud-ram-neon_fp-090310.zip
Download: boot-cm_2634.6-oc-uv-btn-aud-ram-neon_fp-090310.zip

boot-cm_2634.6-oc-uv-xtra-btn-aud-ram-neon_fp-090310.zip
Download: boot-cm_2634.6-oc-uv-xtra-btn-aud-ram-neon_fp-090310.zip

——–

Source:
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-mem-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.35.4 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-increase 883 to 1275,499 to 1075, and 460 to 1050. (acpuclock-qsd8x50.c)
-Reduce boot up clock to 806. (acpuclock-qsd8x50.c)
-clear the client data in i2c (tps65023-regulator.c)
-adjust Q6_HW_BT_SCO and Q6_HW_BT_A2DP to -2000/800 (board-mahimahi-audio.c and q6audio.c)

-merged (from cyanogenmod’s cm-kernel github):
f638e18ef07074488b72 (arm: mm: Don’t free prohibited memmap entries)

-merged (android.git.kernel.org’s common github):
0de230b2558e00449a41113061cd15a3bdb80b42 (PM: Prevent waiting forever on asynchronous resume after abort)
bc344f6ba89d5a60334105702f829bc3464d41ef (net: Fix CONFIG_RPS option to be turned off)

-revert (from android.git.kernel.org’s common github):
1e3b38346e852e3f7d6b255a290611afecf083e3 (net: wireless: bcm4329: Update to Version 4.218.248)

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

Things to do:
-Cleanup of some unused definitions in the camera space

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.4-oc-uv-xtra-btn-aud-ram-neon_fp-090210.zip
Download: boot-cm_2635.4-oc-uv-xtra-btn-aud-ram-neon_fp-090210.zip

——–

Source:
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.34.6 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-increase 883 to 1275,499 to 1075, and 460 to 1050. (acpuclock-scorpion.c)
-Reduce boot up clock to 806. (acpuclock-scorpion.c)
-adjust Q6_HW_BT_SCO and Q6_HW_BT_A2DP to -2000/800 (board-mahimahi-audio.c and q6audio.c)

-merged (from cyanogenmod’s cm-kernel github):
f638e18ef07074488b72 (arm: mm: Don’t free prohibited memmap entries)

-revert (from android.git.kernel.org’s common github):
1e3b38346e852e3f7d6b255a290611afecf083e3 (net: wireless: bcm4329: Update to Version 4.218.248)

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430972, 458693 and 460075 applied

boot-cm_2634.6-oc-uv-btn-aud-ram-neon_fp-090210.zip
Download: boot-cm_2634.6-oc-uv-btn-aud-ram-neon_fp-090210.zip

boot-cm_2634.6-oc-uv-xtra-btn-aud-ram-neon_fp-090210.zip
Download: boot-cm_2634.6-oc-uv-xtra-btn-aud-ram-neon_fp-090210.zip

——–

Source:
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-mem-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.35.4 – OC-UV-FP – Dream/Sapphire (32B/A)

-merged (from cyanogenmod’s cm-kernel github):
f638e18ef07074488b72 (arm: mm: Don’t free prohibited memmap entries)

-merged (from android.git.kernel.org’s common github):
bc344f6ba89d5a60334105702f829bc3464d41ef (net: Fix CONFIG_RPS option to be turned off)
0de230b2558e00449a41113061cd15a3bdb80b42 (PM: Prevent waiting forever on asynchronous resume after abort)

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

Known Issues:
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.4_ds_32b-oc-uv-xtra-fp-090210.zip
Download: boot-cm_2635.4_ds_32b-oc-uv-xtra-fp-090210.zip

32A:
boot-cm_2635.4_ds_32a-oc-uv-xtra-fp-090210.zip
Download: boot-cm_2635.4_ds_32a-oc-uv-xtra-fp-090210.zip

——–

Source:
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

Kernel – 2.6.34.6 – OC-UV-FP – Dream/Sapphire (32B/A)

-merged (from cyanogenmod’s cm-kernel github):
f638e18ef07074488b72 (arm: mm: Don’t free prohibited memmap entries)

-merged (from android.git.kernel.org’s common github):
0de230b2558e00449a41113061cd15a3bdb80b42 (PM: Prevent waiting forever on asynchronous resume after abort)

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2634.6_ds_32b-oc-uv-fp-090210.zip
Download: boot-cm_2634.6_ds_32b-oc-uv-fp-090210.zip

boot-cm_2634.6_ds_32b-oc-uv-xtra-fp-090210.zip
Download: boot-cm_2634.6_ds_32b-oc-uv-xtra-fp-090210.zip

32A:
boot-cm_2634.6_ds_32a-oc-uv-fp-090210.zip
Download: boot-cm_2634.6_ds_32a-oc-uv-fp-090210.zip

boot-cm_2634.6_ds_32a-oc-uv-xtra-fp-090210.zip
Download: boot-cm_2634.6_ds_32a-oc-uv-xtra-fp-090210.zip

——–

Source:
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.