-increase 883 to 1275,499 to 1075, and 460 to 1050. (acpuclock-qsd8x50.c)
-Reduce boot up clock to 806. (acpuclock-qsd8x50.c)
-clear the client data in i2c (tps65023-regulator.c)
-adjust Q6_HW_BT_SCO and Q6_HW_BT_A2DP to -2000/800 (board-mahimahi-audio.c and q6audio.c)
-merged (from cyanogenmod’s cm-kernel github):
f638e18ef07074488b72 (arm: mm: Don’t free prohibited memmap entries)
-merged (android.git.kernel.org’s common github):
0de230b2558e00449a41113061cd15a3bdb80b42 (PM: Prevent waiting forever on asynchronous resume after abort)
bc344f6ba89d5a60334105702f829bc3464d41ef (net: Fix CONFIG_RPS option to be turned off)
-revert (from android.git.kernel.org’s common github):
1e3b38346e852e3f7d6b255a290611afecf083e3 (net: wireless: bcm4329: Update to Version 4.218.248)
Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.
Known Issues:
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.
Things to do:
-Cleanup of some unused definitions in the camera space
——–
-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied
boot-cm_2635.4-oc-uv-xtra-btn-aud-ram-neon_fp-090210.zip
Download: boot-cm_2635.4-oc-uv-xtra-btn-aud-ram-neon_fp-090210.zip
——–
Source:
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
——–
Instructions:
Flash the .zip through recovery
or
fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then
take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and
adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.
Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.
Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor