Monthly Archives: June 2010

JIT – CM5.0.8-T Series – Dream/Sapphire

Posted on by
Reply

JIT for CM5.0.8-T Series – Dream/Sapphire

-built against latest CM Source

Note:
Nothing has changed in reference to JIT

JIT-CM5.0.8_t-ds-060610.zip
Download: JIT-CM5.0.8_t-ds-060610.zip

Note:
This is probably not stable/not stable for the longhaul. If you flash this, do not file any bug reports, until you flash back to the stock rom and observe.

——

Source:
http://github.com/cyanogen/android_dalvik

——

Instructions:
Flash the .zip through recovery

Kernel – 2.6.34 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

Posted on by
Reply

-modify cpufreq_ondemand thresholds

merged (from Cyanogen’s cm-kernel github):
59f7a649a048c29e8e2d576450a79ab4d65fffd6 (gadget: Fix deadlock in UMS fsync_sub)
e904e793ff5fc2d7ce66c57f8e654925bc18a5b7 (msm: camera: replace dmac_inv_range with dmac_flush_range)
fddea24df4abe3093690c12439754ac1cd07d33e (Allow CONFIG_STACKTRACE to be enabled by itself)
05e73582e4558baf5bf3365c29852cb06bbf02e7 ([ARM] msm: mahimahi: Debounce power key)
5ec72b15bb1bb1793d97c1a9b5c9a1cebcc68722 (network: wireless: bcm4329: Fix MAC address import)
fda1ffe903a1a4ffaa1dfff765484aaa1c524384 (network: wireless: bcm4329: Update to Version 4.218.238)
989aff88cac7eebfbc93d2cb31c2de4a8e2cbe05 (network: wireless: Add get_mac_addr functionality to platform)
33e326e7c450e0e21cb50fcc64308479f959ecd4 (network: wireless: bcm4329: Add “HANG” event and console monitoring)

Note:
Known Issues:
-Video camcorder will not work unless you are using Android 2.2 (Froyo) and its associated radio, or CM5.0.8-T Series and Froyo’s radio.

Note:
The wifi module in the update.zip format files is the new one (Version: 4.218.238)
If you would like to try the older version wifi module (more details: ?p=410), push the bcm4329.ko module contained within this .zip to /system/lib/modules:

wifi-OLD.zip
Download: wifi-OLD.zip

-Do not use this kernel set if you are on CM5.0.6

——–

-XTRA contains:
*some more cgroup options
*namespaces support (excluding network)
*deadline i/o scheduler
*v4 block device and data integrity support
*3d register driver
*erratas 430972, 458693 and 460075 applied

CM5.0.5.x, CM5.0.7.x and CM5.0.8-T Series:
boot-cm_2634-oc-uv-btn-aud-ram-neon_fp-060410.zip
Download: boot-cm_2634-oc-uv-btn-aud-ram-neon_fp-060410.zip

boot-cm_2634-oc-uv-xtra-btn-aud-ram-neon_fp-060410.zip
Download: boot-cm_2634-oc-uv-xtra-btn-aud-ram-neon_fp-060410.zip

<><><>

Android 2.2 (Froyo):
boot-cm_2634_froyo-oc-uv-btn-aud-ram-neon_fp-060410.zip
Download: boot-cm_2634_froyo-oc-uv-btn-aud-ram-neon_fp-060410.zip

boot-cm_2634_froyo-oc-uv-xtra-btn-aud-ram-neon_fp-060410.zip
Download: boot-cm_2634_froyo-oc-uv-xtra-btn-aud-ram-neon_fp-060410.zip

——–

Source:
http://github.com/cyanogen/cm-kernel
http://github.com/pershoot/nexus-kernel
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Kernel – 2.6.34 – OC-UV-FP – Dream/Sapphire (32B/A)

Posted on by
Reply

-unset NETFILTER_DEBUG

merged (from Cyanogen’s cm-kernel github):
59f7a649a048c29e8e2d576450a79ab4d65fffd6 (gadget: Fix deadlock in UMS fsync_sub)
fddea24df4abe3093690c12439754ac1cd07d33e (Allow CONFIG_STACKTRACE to be enabled by itself)

——–

-XTRA contains:
*some more cgroup options
*namespaces support (excluding network)
*deadline i/o scheduler
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2634_ds_32b-oc-uv-fp-060410.zip
Download: boot-cm_2634_ds_32b-oc-uv-fp-060410.zip

boot-cm_2634_ds_32b-oc-uv-xtra-fp-060410.zip
Download: boot-cm_2634_ds_32b-oc-uv-xtra-fp-060410.zip

32A:
boot-cm_2634_ds_32a-oc-uv-fp-060410.zip
Download: boot-cm_2634_ds_32a-oc-uv-fp-060410.zip

boot-cm_2634_ds_32a-oc-uv-xtra-fp-060410.zip
Download: boot-cm_2634_ds_32a-oc-uv-xtra-fp-060410.zip

——–

Source:
http://github.com/cyanogen/cm-kernel
http://github.com/pershoot/ds-kernel
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 1.54 (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

Kernel – 2.6.34 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

Posted on by
Reply

-set INET_TUNNEL, IPCOMP and certain IPv6 modules to be built in.

Update (06/02/10):
-set INET_TUNNEL, IPCOMP and certain IPv6 modules to be modular, for non-froyo build.
-unset NETFILTER_DEBUG for non-froyo
-amend update-script for froyo build

Update (06/01/10):
-revert:
47560cf28d6597e8a002 ([ARM] msm: camera: Invalidate cache for preview and stats buffers)
2a672a2ce8273ee684d7 (Revert hack: Replace calls to dmac_inv_range with a WARN to allow compiling msm_camera)
46f65a0b794078a1f46a (Revert ARM: dma-mapping: remove dmac_clean_range and dmac_inv_range)

05/31/10:
merged in (from Cyanogen’s cm-kernel github):
47560cf28d6597e8a002 ([ARM] msm: camera: Invalidate cache for preview and stats buffers)
2a672a2ce8273ee684d7 (Revert hack: Replace calls to dmac_inv_range with a WARN to allow compiling msm_camera)
46f65a0b794078a1f46a (Revert ARM: dma-mapping: remove dmac_clean_range and dmac_inv_range)
32a7bbc4e62950b743c6 (network: wireless: bcm4329: Remove unnecessary set_freezable() calls)

Note:
Known Issues:
-Cannot unmount /sdcard cleanly once mounted to your computer, requiring a reboot.
*-On Android 2.2 (Froyo), it is best if you copy contents to the sdcard in recovery.
-Video camcorder will not work unless you are using Android 2.2 (Froyo) and its associated radio.

Note:
The wifi module in the update.zip format files is the new one (Version: 4.218.209)
If you would like to try the older version wifi module (more details: ?p=410), push the bcm4329.ko module contained within this .zip to /system/lib/modules:

wifi-OLD.zip
Download: wifi-OLD.zip

-Do not use this kernel set if you are on CM5.0.6

——–

CM5.0.5.x, CM5.0.7.x:
boot-cm_2634-oc-uv-btn-aud-ram-neon_fp-060210.zip
Download: boot-cm_2634-oc-uv-btn-aud-ram-neon_fp-060210.zip

boot-cm_2634-oc-uv-xtra-btn-aud-ram-neon_fp-060210.zip
Download: boot-cm_2634-oc-uv-xtra-btn-aud-ram-neon_fp-060210.zip

<><><>

Android 2.2 (Froyo):
boot-cm_2634_froyo-oc-uv-btn-aud-ram-neon_fp-060210.zip
Download: boot-cm_2634_froyo-oc-uv-btn-aud-ram-neon_fp-060210.zip

boot-cm_2634_froyo-oc-uv-xtra-btn-aud-ram-neon_fp-060210.zip
Download: boot-cm_2634_froyo-oc-uv-xtra-btn-aud-ram-neon_fp-060210.zip

——–

Source:
http://github.com/cyanogen/cm-kernel
http://github.com/pershoot/nexus-kernel
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor