This build has been superseded by: http://droidbasement.com/db-blog/?p=2963
Update (12/28, 8.00PM, Eastern):
Device specific changes:
p4-common:
power: add some error checking in set_interactive
To install and test (you must be on the interactive governor (default)):
Download power.p3.so from your model’s folder (links below), found in the test folder.
While booted in (must have root permissioned to ADB (developer settings)):
adb root
adb remount
adb push power.p3.so /system/lib/hw/
adb shell chmod 644 /system/lib/hw/power.p3.so
adb reboot
or
While in recovery:
adb shell mount /system
adb push power.p3.so /system/lib/hw/
adb shell chmod 644 /system/lib/hw/power.p3.so
adb shell umount /system
adb reboot
…..
(12/28, 10.00AM, Eastern):
Here are some UNOFFICIAL builds I ran off this morning (12/28).
Kernel changes:
N/A (re-built alongside ROM build).
Device specific:
p4-common:
-Revert “overlay: packages: remove show_expandedDesktop”
-media: aac: drop to 44100 sampling rate and 1 channel
p4wifi:
-p4wifi: remove audio_policy.tegra
p4vzw:
-p4vzw: remove audio_policy.tegra
p4tmo:
-p4tmo: remove audio_policy.tegra
-media: aac: drop to 44100 sampling rate and 1 channel
p4:
-p4: remove audio_policy.tegra
p3:
-p3: remove audio_policy.tegra
-p3: switch to mini_tablet
-releasetools: sync squisher from vendor/cm
-releasetools: remove more from system
Vendor specific:
p4wifi:
-p4wifi: remove audio_policy.tegra
p4vzw:
-p4vzw: remove audio_policy.tegra
p4tmo:
-p4tmo: remove audio_policy.tegra
p4:
-p4: remove audio_policy.tegra
p3:
-p3: remove audio_policy.tegra
Rom Base:
Sync’d as of ~5.30AM (12/28), Eastern.
Recovery:
Built recovery (in the folder) is CWM 6.0.2.5.
Note:
-It is best to wipe when coming from 4.1 or previous OS version.
-Data on the internal/fake sdcard will go to 0/ (i.e. /sdcard/0/; /data/media/0/). Install the recovery in the folder so it can deal with it.
-Enable wallpaper hack (settings -> launcher -> home) to boost home UI response (when using a static wallpaper).
-This build contains the current development kernel (3.1.10; 12/28).
-P3: If you use GAPPS, you must install minimal gapps: http://forum.xda-developers.com/showpost.php?p=35993090&postcount=1
It is best to:
fastboot erase system
fastboot boot CWM
flash rom
flash minimal gapps
-P3: To save on system space, these have been removed:
Calendar (can be installed from Play Store)
some media/audio -> ringtones, alarms and notifications
bin/recovery
VideoEditor
QuickSearchBox (Search can be installed from Play Store)
xbin/vim (vi is included in busybox)
…..
Known Issues:
-A random flicker (it’s faint and fast) can be observed occasionally/infrequently. If this becomes a nuisance to you, you can try to alleviate this by selecting ‘Disable HW overlays’ in Developer Settings. This does not survive a reboot (must be selected on every boot) and impacts swiping motion (it slows it down) in Trebuchet (the Launcher).
-P4*: A 720P recording, when played back, will have artifacts in the upper section of the image. Also when launching the recorded video for the first time, you will encounter a bit of a delay before it launches.
-P4*: If you use the standard GAPPS (from goo), the keyboard will close if typed on for 2 or 3 letters quickly in succession, if you use Google Search, Messaging and/or Gtalk (there could be more). This is a GAPPS library issue. Install a third party keyboard (Swiftkey 3 works ok) and switch to it. This does not affect Browser, System, etc (stock KB works fine there). The GAPPS from wingray don’t appear to exhibit this behavior from brief feedback (make sure your system is cleaned out using the latest recovery, prior to installing rom and gapps if you had the set from goo installed prior (it has also been reported that data needed to be wiped as well to rid of the residuals)): http://forum.xda-developers.com/showpost.php?p=35825009&postcount=3553
-Wallpaper will be down aligned on the lockscreen.
Enjoy!
For:
GT-P7100 (p3), GT-P7500 (p4), GT-P7510 (p4wifi), SCH-I905 (p4vzw) and SGH-T859 (p4tmo)
More Notes:
-Use the supplied recovery (in the folder (use Odin 1.85 to flash it)), if you are not on a compatible/recent recovery.
-For P4VZW: You must be on stock ICS (and it’s modem) before flashing to this build, for LTE functionality
-For P4WIFI UK: You must be on the US ICS bootloader (odin .tar.md5 inside the .zip in the folder), otherwise you may incur a rolling screen
-For P4: You must be on the UK ICS bootloader (odin .tar.md5 from AUS inside the folder), otherwise you may incur a rolling screen.
-For P3: It is advised to be on P4’s ICS modem for best results.
-For P4*: You must be on the ICS modem for best results.
…..
P4WIFI: http://droidbasement.com/galaxy/roms/cm10.1/p4wifi
P4VZW: http://droidbasement.com/galaxy/roms/cm10.1/p4vzw
P4TMO: http://droidbasement.com/galaxy/roms/cm10.1/p4tmo
P4: http://droidbasement.com/galaxy/roms/cm10.1/p4
P3: http://droidbasement.com/galaxy/roms/cm10.1/p3
…..
Source: https://github.com/cyanogenmod, https://github.com/pershoot
