Kernel – 2.6.35.7 – OC-UV-BTN-AUD-RAM-NEON_FP (1.113GHZ) – Nexus

-set yaffs xattrib to Y
-add back in bus_ops->remove (mmc_suspend_host) and claim_host from 6b088157c615407bb4bc380f2c4015d3d
-core.c: add delay to mmc_resume_host

-revert (from kernel-2635 master):
b4b0363bb79b35a6b51ec26dc1d472d25390a27a (mmc: Fix pm_notifier obeying deferred resume)

-merged (from cyanogenmod cm-kernel):
30b6972d845ce4d1dfe6 (cm-kernel: correction in cpuset.c)
a66e51d640edff681c15 (Revert “yaffs: sync with yaffs repo”)
771b9c113e783206a095 (yaffs: Import yaffs from Thu Oct 7 10:05:05 2010 +1300)

-merged (from android.git.kernel.org msm):
7989b9bb5cc472eab5d826ae7abe85d06efa7f00 (i2c: msm: provide more debugging info on xfer errors)

Note:
-When charging, after android reports charging complete, wait 30-60 minutes before unplugging.

Known Issues:
-The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

Things to do:
-Cleanup of some unused definitions in the camera space

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-101610.zip
Download: boot-cm_2635.7-oc-uv-xtra-btn-aud-ram-neon_fp-101610.zip

——–

Source:
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Leave a Reply