-defconfig: add few options from clemsyn’s and xiaolu’s configs, for usb serial/net (this is partially in from the last release).
-usb: class: fix carriage return in CONFIG_ERICSSON_F3307_ENABLE
-net: usb: fix carriage return in usbnet_stop and add usb_autopm_put_interface for F3307 (as found in xiaolu’s src)
-defconfig: unset USB_ANDROID_RNDIS

-[arm/tegra] dma: Adding pointer checks
-[arm/tegra]dma: protecting the dma transfer count update
-[arm/tegra] dma: Dma allocation should be thread safe
-[arm/tegra]dma:Continuous double buffer repeat transfer.

In order for UMS (USB mount) to work on Gingerbread, this must be reverted:
https://github.com/CyanogenMod/android_device_harmony/commit/f51f9e2a1037b4e3fb1a (https://github NULL.com/CyanogenMod/android_device_harmony/commit/f51f9e2a1037b4e3fb1aca1b580e36eeab759f9f)

If you are using any of the external modules, please download them fresh and re-push them in to place.

-If you are on the stock rom/stock’ish rom (froyo), set your wifi to never sleep.
-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock/stock’ish rom).

Known Issues:
-warning from sysfs group for cpufreq, manage irq and nvec release
-unable to see ondemand and interactive governor choices in sysfs cpufreq governors list
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-backport AOSP’s frequency scaling
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch


-XTRA contains:
*ondemand governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
Download: boot-cm_2632.36-xtra-vfp_fp-040111.zip (http://droidbasement NULL.com/gtab/kernels/2632/27/boot-cm_2632 NULL.36-xtra-vfp_fp-040111 NULL.zip)

lib-2632.36.tar.gz (kernel modules)
Download: lib-2632.36.tar.gz (http://droidbasement NULL.com/gtab/kernels/2632/27/lib-2632 NULL.36 NULL.tar NULL.gz)

ViewSonic Gtab/Malata Zpad (Gingerbread):
Download: boot-cm_2632.36_gb-xtra-vfp_fp-040111.zip (http://droidbasement NULL.com/gtab/kernels/2632/27/boot-cm_2632 NULL.36_gb-xtra-vfp_fp-040111 NULL.zip)

lib-2632.36_gb.tar.gz (kernel modules)
Download: lib-2632.36_gb.tar.gz (http://droidbasement NULL.com/gtab/kernels/2632/27/lib-2632 NULL.36_gb NULL.tar NULL.gz)

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

Malata Zpad [New Bootloader] (Froyo):
Download: boot-cm_2632.36_zpad_newbl-xtra-vfp_fp-040111.zip (http://droidbasement NULL.com/gtab/kernels/2632/27/zpad/boot-cm_2632 NULL.36_zpad_newbl-xtra-vfp_fp-040111 NULL.zip)

lib-2632.36_gb.tar.gz (kernel modules)
Download: lib-2632.36_zpad-newbl.tar.gz (http://droidbasement NULL.com/gtab/kernels/2632/27/zpad/lib-2632 NULL.36_zpad-newbl NULL.tar NULL.gz)

Malata Zpad [New Bootloader] (Gingerbread):
Download: boot-cm_2632.36_gb_zpad_newbl-xtra-vfp_fp-040111.zip (http://droidbasement NULL.com/gtab/kernels/2632/27/zpad/boot-cm_2632 NULL.36_gb_zpad_newbl-xtra-vfp_fp-040111 NULL.zip)

lib-2632.36_gb.tar.gz (kernel modules)
Download: lib-2632.36_gb_zpad-newbl.tar.gz (http://droidbasement NULL.com/gtab/kernels/2632/27/zpad/lib-2632 NULL.36_gb_zpad-newbl NULL.tar NULL.gz)


http://github.com/pershoot/gtab-2632 (http://github NULL.com/pershoot/gtab-2632)
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary (http://nv-tegra NULL.nvidia NULL.com/gitweb/?p=linux-2 NULL.6 NULL.git;a=summary)
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary (http://git NULL.kernel NULL.org/?p=linux/kernel/git/stable/linux-2 NULL.6 NULL.32 NULL.y NULL.git;a=summary)
http://github.com/pershoot/vision-2632 (http://github NULL.com/pershoot/vision-2632)
http://github.com/CyanogenMod/htc-kernel-msm7x30 (http://github NULL.com/CyanogenMod/htc-kernel-msm7x30)
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.36 (http://android NULL.git NULL.kernel NULL.org/?p=kernel/tegra NULL.git;a=shortlog;h=refs/heads/android-tegra-2 NULL.6 NULL.36)


Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.36.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/
adb shell chmod 644 /system/lib/modules/
adb shell insmod /system/lib/modules/

You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

« »