Firmware – CyanogenMod 10 – Galaxy Tab 10.1

Here are some UNOFFICIAL builds that were ran off today (3/06).

This is JellyBean 4.1.2 (JZ054K).

Kernel:
-Revert “tegra: dvfs: add extra slot for CPU_DVFS to accomodate 15 slot TEGRA_OC range”
-Revert “tegra: dvfs: core|speedo/aon +25mv over cpu and adjust DVFS (for TEGRA_OC)”
-tegra: dvfs: adjust voltages
mm: use aligned zone start for pfn_to_bitidx calculation
ARM: DMA: Fix struct page iterator in dma_cache_maint() to work with sparsemem
-Revert “block: prepare I/O context code for BFQ-v4 for 3.1”
block: prepare I/O context code for BFQ-v6 for 3.1
-Revert “block: introduce the BFQ-v5r1 I/O sched for 3.1”
block: introduce the BFQ-v6 I/O sched for 3.1
sched/rt: Use root_domain of rt_rq not current processor
Add ROW I/O Scheduler by Qualcomm.
block: Add support for reinsert a dispatched req
block: Add API for urgent request handling
block: row: squash commits from codeaurora.
block: fixes required to make the kernel compile with ROW.
-defconfig: jb: enable ROW
SCHEDULER: Autogroup patch group by current user android UID instead of task
video: tegra: dc: fix bug causing drawing before flipping
video: tegra: dc: Fix the check of dirty window.
-power: p3: move CHARGER_USB logic in to MACH_SAMSUNG_P3
cpuset: fix cpuset_print_task_mems_allowed() vs rename() race
mm: fix pageblock bitmap allocation
mm/fadvise.c: drain all pagevecs if POSIX_FADV_DONTNEED fails to discard all
tmpfs: fix use-after-free of mempolicy object

Device specific:
p4-common:
-bootanimation: enable RGB565, TEXTURE_CACHE and set w/h
-init: remove adb forced config and switch to mtp.
-init: move MTP to DEFAULT_PROPERTY
-overlay: disable sf_limitedAlpha
-overlay: tune some animation settings
-power: interactive: adjust some parameters

p4wifi:
-system: update kernel

p4vzw:
-system: update kernel

p4tmo:
-system: update kernel

p4:
-system: update kernel

p3:
-system: update kernel

Vendor specific:
N/A

Rom Base:
Sync’d as of ~12.00PM (3/06), Eastern.

Recovery:
Built recovery (in the folder) is CWM 6.0.2.8.

Local Build:
Update to Oracle JDK 1.6.0_41

Note:
-This build contains the current development kernel (3.1.10; 3/06).
-For P3: If you use GAPPS, then you must use a smaller gapps package. You can find one here: http://forum.xda-developers.com/showpost.php?p=34791713&postcount=976
-Do not update Search from Play (Market), otherwise Search/Google Now will crash.

…..

Known Issues:
-Wallpaper will be shifted downward when applied (Trebuchet).
-WiFi direct is not operational (devices aren’t found on scan).
-Android won’t signify when charging (only when charged), unless force_usb_charging is activated.

Enjoy!

For:
GT-P7100 (p3), GT-P7500 (p4), GT-P7510 (p4wifi), SCH-I905 (p4vzw) and SGH-T859 (p4tmo)

Note:
-Use the supplied recovery (in the folder (use Odin 1.85 to flash it)), if you are not on a compatible/recent recovery.
-For P4VZW: You must be on stock ICS (and it’s modem) before flashing to this build, for LTE functionality
-For P4WIFI UK: You must be on the US ICS bootloader (odin .tar.md5 inside the .zip in the folder), otherwise you may incur a rolling screen
-For P4: You must be on the UK ICS bootloader (odin .tar.md5 from UK inside the folder), otherwise you may incur a rolling screen.
-For P3: It is advised to be on P4’s ICS modem for best results.
-For P4*: You must be on the ICS modem for best results.

…..

Installation Instructions:
-Flash CWM 6.0.2.8 in Download Mode via Odin 1.85 (PDA field)
-Boot CWM

If you are coming from CM 10.1, from another OS/Rom or have a P3 and have had another GAPPS installed (then the one listed above):
-Format /system

-Flash rom

-If you use GAPPS (P4 only; P3 will use minimal GAPPS (above)), you can use 10/11 from goo.

If you are coming from CM 10.1 or another OS/Rom:
-Wipe in CWM

-Reboot

…..

P4WIFI: http://droidbasement.com/galaxy/roms/cm10/p4wifi

P4VZW: http://droidbasement.com/galaxy/roms/cm10/p4vzw

P4TMO: http://droidbasement.com/galaxy/roms/cm10/p4tmo

P4: http://droidbasement.com/galaxy/roms/cm10/p4