Droid Basement

-merged (from nv-tegra.nvidia.com, rel-2010-11):
arm: tegra: fuse: accept strings starting with 0x/x
i2c: tegra: Avoid duplicate write into Tx Fifo

Ramdisk:
-use HC 3.1 supplied ramdisk
-ro.secure=0 (adb root shell)
-remove setting min/max/governor after boot (moved to the kernel).

Note:
-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you. I will most likely flash this in myself and yank it from the ramdisk moving forward.
-This will not work on the ‘v’.
-This will not work for TouchWiz UX

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Things to do:
Implement pulling/constructing the ramdisk while flashing.
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

boot-cm_2636.4-oc-xtra-vfp_fp-071311.zip:
Download: boot-cm_2636.4-oc-xtra-vfp_fp-071311.zip

lib-2636.4.tar.gz
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

-merged (from nv-tegra.nvidia.com, dev-hc/rel-12r3):
regulator: enable supply regulator only when use count is zero
regulator: Copy constraints from regulators when initialising them
Regulator: add suspend-finish API for regulator core.
ARM: tegra: power LP0/LP1 selection via sysfs
ARM: tegra: power: add partition power check before suspend
arm: tegra: power: fix lp0 resume failure
ARM: tegra: power: Set minimum LP2 target residency
video: tegra: nvmap: fix GART pin lockups
arm: tegra2: clocks: add fuse and fuse_burn clocks
arm: tegra: dvfs: add entry for fuse_burn
arm: tegra: fuse: new programming sequence

Ramdisk:
-use HC 3.1 supplied ramdisk
-ro.secure=0 (adb root shell)
-remove setting min/max/governor after boot (moved to the kernel).

Note:
-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you. I will most likely flash this in myself and yank it from the ramdisk moving forward.
-This will not work on the ‘v’.
-This will not work for TouchWiz UX

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Things to do:
Implement pulling/constructing the ramdisk while flashing.
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

boot-cm_2636.4-oc-xtra-vfp_fp-071211.zip:
Download: boot-cm_2636.4-oc-xtra-vfp_fp-071211.zip

lib-2636.4.tar.gz
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

-tegra: dvfs: increase voltages; 900mv – 1250mv
-cpufreq: ondemand: reduce DEF_SAMPLING_DOWN_FACTOR

-revert:
cpufreq: ondemand: Add min_frequency_down_differential (referenced from vision-2635)

Ramdisk:
-use HC 3.1 supplied ramdisk
-ro.secure=0 (adb root shell)
-remove setting min/max/governor after boot (moved to the kernel).

Note:
-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you. I will most likely flash this in myself and yank it from the ramdisk moving forward.
-This will not work on the ‘v’.

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Things to do:
Implement pulling/constructing the ramdisk while flashing.
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

boot-cm_2636.4-oc-xtra-vfp_fp-071011.zip:
Download: boot-cm_2636.4-oc-xtra-vfp_fp-071011.zip

lib-2636.4.tar.gz
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

-merged up to kernel.org’s, 2.6.32.42

-merged (from cyanogenmod, lge-kernel-star):
cpu_stop: implement stop_cpu[s]()
stop_machine: reimplement using cpu_stop
sched: Fix pick_next_highest_task_rt() for cgroups
mm: compaction: memory compaction core
mm: compaction: add /proc trigger for memory compaction
mm: compaction: add /sys trigger for per-node memory compaction
Implement read(2) in ashmem driver
ashmem: Fix ASHMEM_SET_PROT_MASK.
Support lseek(2) in ashmem driver
rcu: Cleanup: balance rcu_irq_enter()/rcu_irq_exit() calls
hrtimer, softirq: Fix hrtimer->softirq trampoline

-merged (from ratanakvlun, gtab-232 forked)
cpufreq: Improve handling of managed cpus

If you are using any of the external modules, please download them fresh and re-push them in to place.

Note:
-If you are on the stock rom/stock’ish rom (froyo), set your wifi to never sleep.
-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock/stock’ish rom).

Known Issues:
-warning from manage irq and nvec release function
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.42-oc-uv-xtra-vfpv3_fp-070211.zip
Download: boot-cm_2632.42-oc-uv-xtra-vfp_fp-070211.zip

lib-2632.42.tar.gz (kernel modules)
Download: lib-2632.42.tar.gz

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.42_gb-oc-uv-xtra-vfp_fp-070211.zip
Download: boot-cm_2632.42_gb-oc-uv-xtra-vfp_fp-070211.zip

lib-2632.42_gb.tar.gz (kernel modules)
Download: lib-2632.42_gb.tar.gz

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

ViewSonic Gtab/Malata Zpad [New Bootloader] (Froyo):
boot-cm_2632.42_newbl-oc-uv-xtra-vfp_fp-070211.zip
Download: boot-cm_2632.42_newbl-oc-uv-xtra-vfp_fp-070211.zip

lib-2632.42.tar.gz (kernel modules)
Download: lib-2632.42.tar.gz

ViewSonic Gtab/Malata Zpad [New Bootloader] (Gingerbread):
boot-cm_2632.42_gb_newbl-oc-uv-xtra-vfp_fp-070211.zip
Download: boot-cm_2632.42_gb_newbl-oc-uv-xtra-vfp_fp-070211.zip

lib-2632.42_gb.tar.gz (kernel modules)
Download: lib-2632.42_gb.tar.gz

——–

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30
http://github.com/CyanogenMod/cm-kernel
https://github.com/CyanogenMod/lge-kernel-star
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.36
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/mblaster/linux_2.6.32_folio100
https://github.com/Cpasjuste/android_kernel_lg_p990
https://github.com/Kali-/htc-kernel-msm7x30
http://android.git.kernel.org/?p=kernel/msm.git;a=summary
https://github.com/ratanakvlun/gtab-2632
——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.42.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.42-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.42-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.42-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

Overclocking-
How-To:
-Install the latest SetCPU (2.1.3 is current) from the market and/or XDA (http://forum.xda-developers.com/showthread.php?t=505419)
-Select auto
-If using CM7, then you can use the included CPU Settings within CyanogenMod Settings.

Note:
If you were using SetCPU prior, with ‘custom’ and this kernel set, please go to device selection and select auto. Please delete the custom setcpu file on your filesystem:

adb shell rm /data/local/setcpu

Note2:
Be aware, that if you leave it pinned to max, hammering it, it will get warm/warmer then your used to at 1GHZ, pinned.
It is advised not to select any of the 2 governor’s listed (but, at the very least, not performance).
It is advised to keep your min value at 216.

-initial release (7/2/11)
-use GT-P7510 source from opensource.samsung.com and supplied defconfig, as a base
-merged up to kernel.org’s, 2.6.36.4
-oc to 1.4GHZ @ 1.225mv
-increase voltages to system/core
-similar optimisations as gtab-2632 (-O2, cortex/vfp/fp optimisations via CodeSourcery 2009-q1)
-merged in various changes from gtab-2632, vision-2635, AOSP, kernel.org and nv-tegra.nvidia.com
-Autogroup (session)
-PS3/XBOX360(JOYSTICK),NTFS,CIFS,AUFS, mouse
-use koush’s anykernel in its partial form.

Ramdisk:
-use HC 3.1 supplied ramdisk
-ro.secure=0 (adb root shell)
-remove setting min/max/governor after boot (moved to the kernel).

Note:
-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you. I will most likely flash this in myself and yank it from the ramdisk moving forward.
-This will not work on the ‘v’.

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Things to do:
Implement pulling/constructing the ramdisk while flashing.
Undervolt low/mid ranges
Implement UMS

Thanks to nakedninja42, Rlcohen70, concept0, used2hvatreo and proengin for the assistance in testing!

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

boot-cm_2636.4-oc-xtra-vfp_fp-070211.zip:
Download: boot-cm_2636.4-oc-xtra-vfp_fp-070211.zip

lib-2636.4.tar.gz
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.