-Revert “common: dfs: always make 912MHZ the max scaling clock”
\n-Revert “common: dfs: set max scaling clock to 912”
\n-harmony: enable event: sdio1_dat1
\n-tegra: Add platform data for USB accessory function (Original Author: Mike Lockwood) (gingerbread)<\/p>\n
-merged (from cyanogenmod android-msm-2.6.37) (gingerbread):
\nUSB: gadget: f_accessory: New gadget driver for android USB accesories
\nUSB: gadget: f_accessory: Misc improvements and cleanup:
\nUSB: gadget: f_accessory: Clear accessory strings when USB is disconnect\u2026
\nUSB: gadget: f_accessory: Clear previous strings on ACCESSORY_GET_PROTOC\u2026
\nUSB: gadget: f_accessory: Clear disconnected flag when driver file is op\u2026
\nUSB: gadget: f_accessory: Add string for accessory\u2019s unique serial numbe\u2026
\nUSB: gadget: f_accessory: Set bNumEndpoints to correct value of 2
\n [ARM] usb: msm72k_udc: Fix handling of OUT packets on ep0 with length > \u2026<\/p>\n
-merged (from android.git.kernel.org msm) (gingerbread):
\n USB: gadget: composite: Use separate switches for connected and config state<\/p>\n
….<\/p>\n
In order for UMS (USB mount) to work on Gingerbread, this must be reverted: If you are using any of the external modules, please download them fresh and re-push them in to place.<\/p>\n Note: Known Issues: Things to do: ——–<\/p>\n -XTRA contains: ViewSonic Gtab\/Malata Zpad (Froyo): lib-2632.39.tar.gz (kernel modules) ViewSonic Gtab\/Malata Zpad (Gingerbread): lib-2632.39_gb.tar.gz (kernel modules) Note (from proengin for Malata Zpad): ViewSonic Gtab\/Malata Zpad [New Bootloader] (Froyo): lib-2632.39.tar.gz (kernel modules) ViewSonic Gtab\/Malata Zpad [New Bootloader] (Gingerbread): lib-2632.39_gb.tar.gz (kernel modules) ——–<\/p>\n Source: ——–<\/p>\n Instructions: To use one of the kernel modules: Note: Overclocking- Note: adb shell rm \/data\/local\/setcpu<\/p>\n Note2: -Revert “common: dfs: always make 912MHZ the max scaling clock” -Revert “common: dfs: set max scaling clock to 912” -harmony: enable event: sdio1_dat1 -tegra: Add platform data for USB accessory function (Original Author: Mike Lockwood) (gingerbread) -merged (from cyanogenmod android-msm-2.6.37) (gingerbread): USB: gadget: f_accessory: New gadget driver for android USB accesories USB: gadget: f_accessory: Misc […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-1876","post","type-post","status-publish","format-standard","hentry","category-android"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/posts\/1876","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/comments?post=1876"}],"version-history":[{"count":20,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/posts\/1876\/revisions"}],"predecessor-version":[{"id":4217,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/posts\/1876\/revisions\/4217"}],"wp:attachment":[{"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/media?parent=1876"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/categories?post=1876"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/tags?post=1876"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nhttps:\/\/github.com\/CyanogenMod\/android_device_harmony\/commit\/f51f9e2a1037b4e3fb1a<\/a><\/p>\n
\n-If you are on the stock rom\/stock’ish rom (froyo), set your wifi to never sleep.
\n-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock\/stock’ish rom).<\/p>\n
\n-warning from manage irq and nvec release function
\n-When waking up from standby\/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
\n-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
\n**Devices that don’t work: Jabbra.
\n**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.<\/p>\n
\n-clean up the barrage of warnings from TapnTap\/Viewsonic’s patch<\/p>\n
\n*ondemand governor default
\n*BFQ I\/O Scheduler
\n*namespaces support (excluding network)
\n*v4 block device and data integrity support
\n*Tegra NvEC embedded controller driver
\n*erratas 430973, 458693 and 460075 applied<\/p>\n
\nboot-cm_2632.39-oc-uv-xtra-vfpv3_fp-043011.zip
\nDownload:<\/strong> boot-cm_2632.39-oc-uv-xtra-vfp_fp-043011.zip<\/a><\/p>\n
\nDownload:<\/strong> lib-2632.39.tar.gz<\/a><\/p>\n
\nboot-cm_2632.39_gb-oc-uv-xtra-vfp_fp-043011.zip
\nDownload:<\/strong> boot-cm_2632.39_gb-oc-uv-xtra-vfp_fp-043011.zip<\/a><\/p>\n
\nDownload:<\/strong> lib-2632.39_gb.tar.gz<\/a><\/p>\n
\nYou should be on CWM0.8 (bekit)
\nThe bootloader.bin must match CWM0.8 (bekit)<\/p>\n
\nboot-cm_2632.39_newbl-oc-uv-xtra-vfp_fp-043011.zip
\nDownload:<\/strong> boot-cm_2632.39_newbl-oc-uv-xtra-vfp_fp-043011.zip<\/a><\/p>\n
\nDownload:<\/strong> lib-2632.39.tar.gz<\/a><\/p>\n
\nboot-cm_2632.39_gb_newbl-oc-uv-xtra-vfp_fp-043011.zip
\nDownload:<\/strong> boot-cm_2632.39_gb_newbl-oc-uv-xtra-vfp_fp-043011.zip<\/a><\/p>\n
\nDownload:<\/strong> lib-2632.39_gb.tar.gz<\/a><\/p>\n
\nhttp:\/\/github.com\/pershoot\/gtab-2632<\/a>
\nhttp:\/\/nv-tegra.nvidia.com\/gitweb\/?p=linux-2.6.git;a=summary<\/a>
\nhttp:\/\/git.kernel.org\/?p=linux\/kernel\/git\/stable\/linux-2.6.32.y.git;a=summary<\/a>
\nhttp:\/\/github.com\/pershoot\/vision-2632<\/a>
\nhttp:\/\/github.com\/CyanogenMod\/htc-kernel-msm7x30<\/a>
\nhttp:\/\/github.com\/CyanogenMod\/cm-kernel<\/a>
\nhttps:\/\/github.com\/CyanogenMod\/lge-kernel-star<\/a>
\nhttp:\/\/android.git.kernel.org\/?p=kernel\/tegra.git;a=shortlog;h=refs\/heads\/android-tegra-2.6.36<\/a>
\nhttp:\/\/android.git.kernel.org\/?p=kernel\/common.git;a=summary<\/a>
\nhttps:\/\/github.com\/mblaster\/linux_2.6.32_folio100<\/a>
\nhttps:\/\/github.com\/Cpasjuste\/android_kernel_lg_p990<\/a>
\nhttps:\/\/github.com\/Kali-\/htc-kernel-msm7x30<\/a>
\nhttp:\/\/android.git.kernel.org\/?p=kernel\/msm.git;a=summary<\/a><\/p>\n
\nFlash the .zip through recovery<\/p>\n
\nPull the one you want from lib-2632.39.tar.gz (winrar can open this),
\nadb remount
\nadb push MODULE.ko \/system\/lib\/modules\/2.6.32.39-cyanogenmod\/
\nadb shell chmod 644 \/system\/lib\/modules\/2.6.32.39-cyanogenmod\/MODULE.ko
\nadb shell insmod \/system\/lib\/modules\/2.6.32.39-cyanogenmod\/MODULE.ko<\/p>\n
\nYou can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.<\/p>\n
\nHow-To:
\n-Install the latest SetCPU (2.11a is current) from the market and\/or XDA (http:\/\/forum.xda-developers.com\/showthread.php?t=505419)
\n-Select auto
\n-If using CM7, then you can use the included CPU Settings within CyanogenMod Settings.<\/p>\n
\nIf you were using SetCPU prior, with ‘custom’ and this kernel set, please go to device selection and select auto. Please delete the custom setcpu file on your filesystem:<\/p>\n
\nBe aware, that if you leave it pinned to max, hammering it, it will get warm\/warmer then your used to at 1GHZ, pinned.
\nIt is advised not to select any of the 2 governor’s listed (but, at the very least, not performance).
\nIt is advised to keep your min value at 216.<\/p>\n","protected":false},"excerpt":{"rendered":"