-merge up to kernel.org’s 2.6.32.39<\/p>\n
Note:
\nThe max scaling clock is set to 912MHZ on boot. If you are not planning on using SetCPU and\/or cpufreq sysfs to adjust your clocks, and you would like to run at max 1GHZ, do this for your specific device:<\/p>\n
adb shell
\ncd \/sys\/devices\/system\/cpu\/cpu0\/cpufreq
\necho 1000000 >scaling_max_freq<\/p>\n
Alternatively, you can create an init.d script (on boot) and\/or a gscript (manual click) to do this for you.<\/p>\n
….<\/p>\n
In order for UMS (USB mount) to work on Gingerbread, this must be reverted: If you are using any of the external modules, please download them fresh and re-push them in to place.<\/p>\n Note: Known Issues: Things to do: ——–<\/p>\n -XTRA contains: ViewSonic Gtab\/Malata Zpad (Froyo): lib-2632.39.tar.gz (kernel modules) ViewSonic Gtab\/Malata Zpad (Gingerbread): lib-2632.39_gb.tar.gz (kernel modules) Note (from proengin for Malata Zpad): Malata Zpad [New Bootloader] (Froyo): lib-2632.39.tar.gz (kernel modules) Malata Zpad [New Bootloader] (Gingerbread): lib-2632.39_gb.tar.gz (kernel modules) ——–<\/p>\n Source: ——–<\/p>\n Instructions: To use one of the kernel modules: Note: Overclocking- Note: -merge up to kernel.org’s 2.6.32.39 Note: The max scaling clock is set to 912MHZ on boot. If you are not planning on using SetCPU and\/or cpufreq sysfs to adjust your clocks, and you would like to run at max 1GHZ, do this for your specific device: adb shell cd \/sys\/devices\/system\/cpu\/cpu0\/cpufreq echo 1000000 >scaling_max_freq Alternatively, you […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-1793","post","type-post","status-publish","format-standard","hentry","category-android"],"amp_enabled":true,"_links":{"self":[{"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/posts\/1793","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/comments?post=1793"}],"version-history":[{"count":9,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/posts\/1793\/revisions"}],"predecessor-version":[{"id":4229,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/posts\/1793\/revisions\/4229"}],"wp:attachment":[{"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/media?parent=1793"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/categories?post=1793"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/droidbasement.com\/db-blog\/wp-json\/wp\/v2\/tags?post=1793"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nhttps:\/\/github.com\/CyanogenMod\/android_device_harmony\/commit\/f51f9e2a1037b4e3fb1a<\/a><\/p>\n
\n-If you are on the stock rom\/stock’ish rom (froyo), set your wifi to never sleep.
\n-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock\/stock’ish rom).<\/p>\n
\n-warning from sysfs group for cpufreq, manage irq and nvec release
\n-unable to see ondemand and interactive governor choices in sysfs cpufreq governors list
\n-When waking up from standby\/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
\n-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
\n**Devices that don’t work: Jabbra.
\n**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.<\/p>\n
\n-clean up the barrage of warnings from TapnTap\/Viewsonic’s patch<\/p>\n
\n*ondemand governor default
\n*BFQ I\/O Scheduler
\n*namespaces support (excluding network)
\n*v4 block device and data integrity support
\n*Tegra NvEC embedded controller driver
\n*erratas 430973, 458693 and 460075 applied<\/p>\n
\nboot-cm_2632.39-oc-uv-xtra-vfpv3_fp-042211.zip
\nDownload:<\/strong> boot-cm_2632.39-oc-uv-xtra-vfp_fp-042211.zip<\/a><\/p>\n
\nDownload:<\/strong> lib-2632.39.tar.gz<\/a><\/p>\n
\nboot-cm_2632.39_gb-oc-uv-xtra-vfp_fp-042211.zip
\nDownload:<\/strong> boot-cm_2632.39_gb-oc-uv-xtra-vfp_fp-042211.zip<\/a><\/p>\n
\nDownload:<\/strong> lib-2632.39_gb.tar.gz<\/a><\/p>\n
\nYou should be on CWM0.8 (bekit)
\nThe bootloader.bin must match CWM0.8 (bekit)<\/p>\n
\nboot-cm_2632.39_zpad_newbl-oc-uv-xtra-vfp_fp-042211.zip
\nDownload:<\/strong> boot-cm_2632.39_zpad_newbl-oc-uv-xtra-vfp_fp-042211.zip<\/a><\/p>\n
\nDownload:<\/strong> lib-2632.39.tar.gz<\/a><\/p>\n
\nboot-cm_2632.39_gb_zpad_newbl-oc-uv-xtra-vfp_fp-042211.zip
\nDownload:<\/strong> boot-cm_2632.39_gb_zpad_newbl-oc-uv-xtra-vfp_fp-042211.zip<\/a><\/p>\n
\nDownload:<\/strong> lib-2632.39_gb.tar.gz<\/a><\/p>\n
\nhttp:\/\/github.com\/pershoot\/gtab-2632<\/a>
\nhttp:\/\/nv-tegra.nvidia.com\/gitweb\/?p=linux-2.6.git;a=summary<\/a>
\nhttp:\/\/git.kernel.org\/?p=linux\/kernel\/git\/stable\/linux-2.6.32.y.git;a=summary<\/a>
\nhttp:\/\/github.com\/pershoot\/vision-2632<\/a>
\nhttp:\/\/github.com\/CyanogenMod\/htc-kernel-msm7x30<\/a>
\nhttp:\/\/android.git.kernel.org\/?p=kernel\/tegra.git;a=shortlog;h=refs\/heads\/android-tegra-2.6.36<\/a>
\nhttp:\/\/android.git.kernel.org\/?p=kernel\/common.git;a=summary<\/a>
\nhttps:\/\/github.com\/mblaster\/linux_2.6.32_folio100<\/a>
\nhttps:\/\/github.com\/Cpasjuste\/android_kernel_lg_p990<\/a><\/p>\n
\nFlash the .zip through recovery<\/p>\n
\nPull the one you want from lib-2632.39.tar.gz (winrar can open this),
\nadb remount
\nadb push MODULE.ko \/system\/lib\/modules\/2.6.32.39-cyanogenmod\/
\nadb shell chmod 644 \/system\/lib\/modules\/2.6.32.39-cyanogenmod\/MODULE.ko
\nadb shell insmod \/system\/lib\/modules\/2.6.32.39-cyanogenmod\/MODULE.ko<\/p>\n
\nYou can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.<\/p>\n
\nHow-To:
\n-Install the latest SetCPU (2.11a is current) from the market and\/or XDA (http:\/\/forum.xda-developers.com\/showthread.php?t=505419)
\n-Select custom<\/p>\n
\nBe aware, that if you leave it pinned to max, hammering it, it will get warm\/warmer then your used to at 1GHZ, pinned.
\nIt is advised not to select any of the 2 governor’s listed (but, at the very least, not performance).
\nIt is advised to keep your min value at 216.<\/p>\n","protected":false},"excerpt":{"rendered":"