Droid Basement

-Revert (Partial): net: wireless: bcm4329: newer country_code/custom coun…
-rcu: add debug_rcu_head_queue
-defconfig: use TINY_PREEMPT_RCU and enable RCU_BOOST

-merged (from android.git.kernel.org, common):
net: wireless: bcm4329: Update example locale table

-merged (from kernel.org, kernel-2638):
rcu: Add a TINY_PREEMPT_RCU
rcu: repair code-duplication FIXMEs
rcu: combine duplicate code, courtesy of CONFIG_PREEMPT_RCU
rcu: apply TINY_PREEMPT_RCU read-side speedup to TREE_PREEMPT_RCU
rcu: performance fixes to TINY_PREEMPT_RCU callback checking
rcu: fix sparse errors in rcutorture.c
rcu: Add tracing data to support queueing models
rcu: move check from rcu_dereference_bh to rcu_read_lock_bh_held
net: suppress RCU lockdep false positive in sock_update_classid
rcu: add priority-inversion testing to rcutorture
rcu: move TINY_RCU from softirq to kthread
rcu: priority boosting for TINY_PREEMPT_RCU
rcu: Make synchronize_srcu_expedited() fast if running readers
rcu: fine-tune grace-period begin/end checks
rcu: limit rcu_node leaf-level fanout
rcu: reduce __call_rcu()-induced contention on rcu_node structures
rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status
rcu: avoid pointless blocked-task warnings
rcu: add debug_rcu_head_queue
mm/mempolicy.c: add rcu read lock to protect pid structure
rcu: remove unused __list_for_each_rcu() macro
mempolicy: remove tasklist_lock from migrate_pages
mm: grab rcu read lock in move_pages()
rcu: Fix unpaired rcu_irq_enter() from locking selftests

Note:
The _gb kernel can only be used on CM Nightly #78 and above.
This is not to be used on HTC Sense (froyo/gingerbread).
This is not to be used on Froyo.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2635.13_gb-oc-uv-xtra-neon_fp-060411.zip
Download: boot-cm_2635.13_gb-oc-uv-xtra-neon_fp-060411.zip

lib-2635.13_gb.tar.gz (kernel modules)
Download: lib-2635.13_gb.tar.gz

——–

Source:
http://github.com/pershoot/vision-2635
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
http://git.kernel.org/?p=linux/kernel/git/longterm/linux-2.6.35.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

Update (6/4; the filename has not changed. please re-download and re-flash):
-Revert rcu: Accelerate callback processing on CPUs not detecting GP end

…..

6/3:
-Revert (Partial): net: wireless: bcm4329: newer country_code/custom coun…
-Revert: Remove all RCU lockdep stuffs

-merged (from android.git.kernel.org, common):
net: wireless: bcm4329: Update example locale table

-merged (from cyanogenmod, lge-kernel-star):
cgroup: Fix an RCU warning in cgroup_path()
cgroups: fix API thinko
cgroups: blkio subsystem as module
sched, wait: Use wrapper functions
memcg: add interface to move charge at task migration
memcg: move charges of anonymous page
memcg: make memcg’s file mapped consistent with global VM
memcg: coalesce charging via percpu storage
cgroups: remove events before destroying subsystem state objects
memcg: rework usage of stats by soft limit
memcg: implement memory thresholds
tree-wide: fix typos “aquire” -> “acquire”, “cumsumed” -> “consumed”
tree-wide: fix assorted typos all over the place
ksm: mem cgroup charge swapin copy
memcg: rename and export try_get_mem_cgroup_from_page()
memcg: add accessor to mem_cgroup.css
memcg: coalesce uncharge during unmap/truncate
memcg: add mem_cgroup_cancel_charge()
mcg: cleanup mem_cgroup_move_parent()
memcg: remove memcg_tasklist
memcg: code clean, remove unused variable in mem_cgroup_resize_limit()
mm/memcontrol.c: fix “integer as NULL pointer” sparse warning
memcg: improve performance in moving charge
memcg: avoid oom during moving charge
memcg: move charges of anonymous swap
memcg: improve performance in moving swap charge
memcg: extract mem_group_usage() from mem_cgroup_read()
memcg: typo in comment to mem_cgroup_print_oom_info()
memcg: use generic percpu instead of private implementation
memcg: update threshold and softlimit at commit
memcg : share event counter rather than duplicate
memcg: Fix merge failures
rcu: Accelerate callback processing on CPUs not detecting GP end

If you are using any of the external modules, please download them fresh and re-push them in to place.

Note:
-If you are on the stock rom/stock’ish rom (froyo), set your wifi to never sleep.
-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock/stock’ish rom).

Known Issues:
-warning from manage irq and nvec release function
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.41-oc-uv-xtra-vfpv3_fp-060311.zip
Download: boot-cm_2632.41-oc-uv-xtra-vfp_fp-060311.zip

lib-2632.41.tar.gz (kernel modules)
Download: lib-2632.41.tar.gz

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.41_gb-oc-uv-xtra-vfp_fp-060311.zip
Download: boot-cm_2632.41_gb-oc-uv-xtra-vfp_fp-060311.zip

lib-2632.41_gb.tar.gz (kernel modules)
Download: lib-2632.41_gb.tar.gz

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

ViewSonic Gtab/Malata Zpad [New Bootloader] (Froyo):
boot-cm_2632.41_newbl-oc-uv-xtra-vfp_fp-060311.zip
Download: boot-cm_2632.41_newbl-oc-uv-xtra-vfp_fp-060311.zip

lib-2632.41.tar.gz (kernel modules)
Download: lib-2632.41.tar.gz

ViewSonic Gtab/Malata Zpad [New Bootloader] (Gingerbread):
boot-cm_2632.41_gb_newbl-oc-uv-xtra-vfp_fp-060311.zip
Download: boot-cm_2632.41_gb_newbl-oc-uv-xtra-vfp_fp-060311.zip

lib-2632.41_gb.tar.gz (kernel modules)
Download: lib-2632.41_gb.tar.gz

——–

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30
http://github.com/CyanogenMod/cm-kernel
https://github.com/CyanogenMod/lge-kernel-star
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.36
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/mblaster/linux_2.6.32_folio100
https://github.com/Cpasjuste/android_kernel_lg_p990
https://github.com/Kali-/htc-kernel-msm7x30
http://android.git.kernel.org/?p=kernel/msm.git;a=summary

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.41.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.41-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.41-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.41-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

Overclocking-
How-To:
-Install the latest SetCPU (2.1.3 is current) from the market and/or XDA (http://forum.xda-developers.com/showthread.php?t=505419)
-Select auto
-If using CM7, then you can use the included CPU Settings within CyanogenMod Settings.

Note:
If you were using SetCPU prior, with ‘custom’ and this kernel set, please go to device selection and select auto. Please delete the custom setcpu file on your filesystem:

adb shell rm /data/local/setcpu

Note2:
Be aware, that if you leave it pinned to max, hammering it, it will get warm/warmer then your used to at 1GHZ, pinned.
It is advised not to select any of the 2 governor’s listed (but, at the very least, not performance).
It is advised to keep your min value at 216.

-merged up to kernel.org’s 2.6.38.8
-Revert (Partial): net: wireless: bcm4329: newer country_code/custom country_code logic

-merged (from cyanogenmod, cm-kernel):
ARM: mm: cache-l2x0: Correct l2x0 initialization
arm: Allow CPU-supported unaligned accesses
msm: iommu: Don’t read from write-only registers
msm: timer: Only use GPT workarounds on ARM11

-merged (from android.git.kernel.org, common):
net: wireless: bcm4329: Update example locale table

Note:
This is not to be used on Froyo/CM6

Known Issue:
-Scores will be a bit low in Quadrant. This is not indicative of its performance.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693, 460075 and 743622 applied

boot-cm_2638.8_gb-oc-uv-xtra-btn-aud-ram-neon_fp-060311.zip
Download: boot-cm_2638.8_gb-oc-uv-xtra-btn-aud-ram-neon_fp-060311.zip

lib-2638.8_gb.tar.gz
Download: lib-2638.8_gb.tar.gz

——–

Source:
http://github.com/pershoot/kernel-2638
https://github.com/cyanogenmod/cm-kernel
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/sandbox/dima/android-msm-2.6.38-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/thelogin/n1batcal
http://android.git.kernel.org/?p=kernel/msm.git;a=summary

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor

Battery Calibration:
To calibrate your battery, download and install “battery calibrator” in Market, by Jon Richards.

Then follow this:
http://forum.xda-developers.com/showpost.php?p=9583271&postcount=340

Update: (6/02; the filename has not changed. please re-download and re-flash):
-defconfig: enable SERIAL_MSM_HS_PURE_ANDROID and SERIAL_BCM_BT_LPM

…..

Kernel 2.6.35.13 – OC-UV-NEON_FP (1.516GHZ) – G2

-based off of HTC’s ace-2.6.35-gb-MR (developer.htc.com) and supplied msm7230_defconfig (2.6.35.10)
-merged up to kernel.org’s 2.6.35.13
-merged in coolbh3k’s/cyanogen’s oc patch
-frequency range is from 806 to 1516; default bootup is 245-806.
-undervolt all frequencies (max mv is 1300)
-merged in zinx’s GAN_ETH wifi calling module modifications
-merged in changes from cyanogen’s htc-kernel-msm7x30, and pershoot’s vision-2632
-optimisations based off of .32 release from Vision.
-added/amended a few things to the config (-xtra (please see below and in github)).
-import autogroup (session) from 2.6.38

Note:
The _gb kernel can only be used on CM Nightly #78 and above.
This is not to be used on HTC Sense (froyo/gingerbread).
This is not to be used on Froyo.

Known Issue:
If you are in the EU, you may not see APs outside of channel 11 (wifi). This will be worked around in the next release.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2635.13_gb-oc-uv-xtra-neon_fp-060111.zip
Download: boot-cm_2635.13_gb-oc-uv-xtra-neon_fp-060111.zip

lib-2635.13_gb.tar.gz (kernel modules)
Download: lib-2635.13_gb.tar.gz

——–

Source:
http://github.com/pershoot/vision-2635
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
http://git.kernel.org/?p=linux/kernel/git/longterm/linux-2.6.35.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

-joystick: xpad: Modify keymappings for XBOX 360 controller (tjc2k4)
-defconfig: enable JOYDEV,JOYSTICK, and XPAD support
-tegra: Amend: Add platform data for USB accessory function (gingerbread; referenced from cyanogenmod, lge-kernel-star)

-merged (from cyanogenmod lge-kernel-star):
lowmemorykiller: only check cache for thresholds
rcu: Integrate rcu_dereference_check() message into lockdep
rcu: Disable lockdep checking in RCU list-traversal primitives
net: Add checking to rcu_dereference() primitives
vfs: Apply lockdep-based checking to rcu_dereference() uses
vfs: Abstract rcu_dereference_check for files-fdtable use
radix-tree: Disable RCU lockdep checking in radix tree
idr: Apply lockdep-based diagnostics to rcu_dereference() uses
security: Apply lockdep-based checking to rcu_dereference() uses
sched: Revert nohz_ratelimit() for now
Remove all RCU lockdep stuffs

If you are using any of the external modules, please download them fresh and re-push them in to place.

Note:
-If you are on the stock rom/stock’ish rom (froyo), set your wifi to never sleep.
-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock/stock’ish rom).

Known Issues:
-warning from manage irq and nvec release function
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.41-oc-uv-xtra-vfpv3_fp-060111.zip
Download: boot-cm_2632.41-oc-uv-xtra-vfp_fp-060111.zip

lib-2632.41.tar.gz (kernel modules)
Download: lib-2632.41.tar.gz

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.41_gb-oc-uv-xtra-vfp_fp-060111.zip
Download: boot-cm_2632.41_gb-oc-uv-xtra-vfp_fp-060111.zip

lib-2632.41_gb.tar.gz (kernel modules)
Download: lib-2632.41_gb.tar.gz

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

ViewSonic Gtab/Malata Zpad [New Bootloader] (Froyo):
boot-cm_2632.41_newbl-oc-uv-xtra-vfp_fp-060111.zip
Download: boot-cm_2632.41_newbl-oc-uv-xtra-vfp_fp-060111.zip

lib-2632.41.tar.gz (kernel modules)
Download: lib-2632.41.tar.gz

ViewSonic Gtab/Malata Zpad [New Bootloader] (Gingerbread):
boot-cm_2632.41_gb_newbl-oc-uv-xtra-vfp_fp-060111.zip
Download: boot-cm_2632.41_gb_newbl-oc-uv-xtra-vfp_fp-060111.zip

lib-2632.41_gb.tar.gz (kernel modules)
Download: lib-2632.41_gb.tar.gz

——–

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30
http://github.com/CyanogenMod/cm-kernel
https://github.com/CyanogenMod/lge-kernel-star
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.36
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/mblaster/linux_2.6.32_folio100
https://github.com/Cpasjuste/android_kernel_lg_p990
https://github.com/Kali-/htc-kernel-msm7x30
http://android.git.kernel.org/?p=kernel/msm.git;a=summary

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.41.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.41-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.41-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.41-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

Overclocking-
How-To:
-Install the latest SetCPU (2.1.3 is current) from the market and/or XDA (http://forum.xda-developers.com/showthread.php?t=505419)
-Select auto
-If using CM7, then you can use the included CPU Settings within CyanogenMod Settings.

Note:
If you were using SetCPU prior, with ‘custom’ and this kernel set, please go to device selection and select auto. Please delete the custom setcpu file on your filesystem:

adb shell rm /data/local/setcpu

Note2:
Be aware, that if you leave it pinned to max, hammering it, it will get warm/warmer then your used to at 1GHZ, pinned.
It is advised not to select any of the 2 governor’s listed (but, at the very least, not performance).
It is advised to keep your min value at 216.

-build koush’s CWM 3.1.0.2 from CyanogenMod’s repo
-fix flaw in conditional check within ensure_path_unmounted (this should truly fix the cache error on backup)

Note:
This will also work on the ‘v’ model.

Known Issues:
-UMS will not work, as of yet.

Download:
recovery-cwm_3.1.0.2-sam-tab-10.1-052611.zip
Download: recovery-cwm_3.1.0.2-sam-tab-10.1-052611.zip

Stock IO Recovery:
Download: recovery.zip

Source:
https://github.com/pershoot/android_device_p7510
https://github.com/pershoot/android_vendor_cyanogen
https://github.com/CyanogenMod/android_vendor_cyanogen
https://github.com/pershoot/android_external_yaffs2
https://github.com/CyanogenMod/android_external_yaffs2
https://github.com/solarnz/android_external_yaffs2
https://github.com/pershoot/android_bootable_recovery
https://github.com/CyanogenMod/android_bootable_recovery
https://github.com/solarnz/android_bootable_recovery
https://github.com/SeraphimSerapis/Samsung-P7100-Recovery

——–

Installation instructions:
It is reccomended you try out the recovery before replacing your stock recovery.
fastboot boot recovery-cwm_3.1.0.2-sam-tab-10.1.img

If you are happy with it, then to replace your recovery:
fastboot flash recovery recovery-cwm_3.1.0.2-sam-tab-10.1.img

Update (Froyo only; the filename has not changed. please re-download and re-flash):
-Revert:
Revert “arm: io: import writel/readl_relaxed from AOSP’s, android-tegra-2.6.36
arm: cache-l2x0: convert to _relaxed in l2x0_shutdown (referenced from cyanogenmod lge-kernel-star)
ARM: 6271/1: Introduce *_relaxed() I/O accessors

…..

-merged up to kernel.org’s 2.6.32.41
-Revert “arm: io: import writel/readl_relaxed from AOSP’s, android-tegra-2.6.36
-arm: cache-l2x0: convert to _relaxed in l2x0_shutdown (referenced from cyanogenmod lge-kernel-star)

-merged (from cyanogenmod lge-kernel-star):
ARM: 6271/1: Introduce *_relaxed() I/O accessors

If you are using any of the external modules, please download them fresh and re-push them in to place.

Note:
-If you are on the stock rom/stock’ish rom (froyo), set your wifi to never sleep.
-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock/stock’ish rom).

Known Issues:
-warning from manage irq and nvec release function
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.41-oc-uv-xtra-vfpv3_fp-052411.zip
Download: boot-cm_2632.41-oc-uv-xtra-vfp_fp-052411.zip

lib-2632.41.tar.gz (kernel modules)
Download: lib-2632.41.tar.gz

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.41_gb-oc-uv-xtra-vfp_fp-052411.zip
Download: boot-cm_2632.41_gb-oc-uv-xtra-vfp_fp-052411.zip

lib-2632.41_gb.tar.gz (kernel modules)
Download: lib-2632.41_gb.tar.gz

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

ViewSonic Gtab/Malata Zpad [New Bootloader] (Froyo):
boot-cm_2632.41_newbl-oc-uv-xtra-vfp_fp-052411.zip
Download: boot-cm_2632.41_newbl-oc-uv-xtra-vfp_fp-052411.zip

lib-2632.41.tar.gz (kernel modules)
Download: lib-2632.41.tar.gz

ViewSonic Gtab/Malata Zpad [New Bootloader] (Gingerbread):
boot-cm_2632.41_gb_newbl-oc-uv-xtra-vfp_fp-052411.zip
Download: boot-cm_2632.41_gb_newbl-oc-uv-xtra-vfp_fp-052411.zip

lib-2632.41_gb.tar.gz (kernel modules)
Download: lib-2632.41_gb.tar.gz

——–

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30
http://github.com/CyanogenMod/cm-kernel
https://github.com/CyanogenMod/lge-kernel-star
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.36
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/mblaster/linux_2.6.32_folio100
https://github.com/Cpasjuste/android_kernel_lg_p990
https://github.com/Kali-/htc-kernel-msm7x30
http://android.git.kernel.org/?p=kernel/msm.git;a=summary

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.41.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.41-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.41-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.41-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

Overclocking-
How-To:
-Install the latest SetCPU (2.1.3 is current) from the market and/or XDA (http://forum.xda-developers.com/showthread.php?t=505419)
-Select auto
-If using CM7, then you can use the included CPU Settings within CyanogenMod Settings.

Note:
If you were using SetCPU prior, with ‘custom’ and this kernel set, please go to device selection and select auto. Please delete the custom setcpu file on your filesystem:

adb shell rm /data/local/setcpu

Note2:
Be aware, that if you leave it pinned to max, hammering it, it will get warm/warmer then your used to at 1GHZ, pinned.
It is advised not to select any of the 2 governor’s listed (but, at the very least, not performance).
It is advised to keep your min value at 216.

-merged up to kernel.org’s 2.6.38.7

Note:
This is not to be used on Froyo/CM6

Known Issue:
-Scores will be a bit low in Quadrant. This is not indicative of its performance.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693, 460075 and 743622 applied

boot-cm_2638.7_gb-oc-uv-xtra-btn-aud-ram-neon_fp-052211.zip
Download: boot-cm_2638.7_gb-oc-uv-xtra-btn-aud-ram-neon_fp-052211.zip

lib-2638.7_gb.tar.gz
Download: lib-2638.7_gb.tar.gz

——–

Source:
http://github.com/pershoot/kernel-2638
https://github.com/cyanogenmod/cm-kernel
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/sandbox/dima/android-msm-2.6.38-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/thelogin/n1batcal
http://android.git.kernel.org/?p=kernel/msm.git;a=summary

Update (5/22; the filename has not changed. please re-download and boot/flash):
-Fix nandroid backups to exclude media during data backup, and fix cache backup.

…..

-build koush’s CWM 3.1.0.1 from CyanogenMod’s repo
-Modified the format_volume to removed directories from /data instead of erasing. (solarnz)
-recovery: Handle /data/media when TARGET_HAS_SDCARD_ON_DATA
-Modified mkyaffs2image so that it won’t include /data/media (solarnz)

Installation instructions:
It is reccomended you try out the recovery before replacing your stock recovery.
fastboot boot recovery-cwm_3.1.0.1-sam-tab-10.1.img

If you are happy with it, then to replace your recovery:
fastboot flash recovery recovery-cwm_3.1.0.1-sam-tab-10.1.img

Note:
This will also work on the ‘v’ model.

Known Issues:
-When backing up, it will error on /cache in certain scenarios.
-UMS will not work, as of yet.

Download:
recovery-cwm_3.1.0.1-sam-tab-10.1-052111.zip
Download: recovery-cwm_3.1.0.1-sam-tab-10.1-052111.zip

Stock IO Recovery:
Download: recovery.zip

Source:
https://github.com/pershoot/android_device_p7510
https://github.com/pershoot/android_vendor_cyanogen
https://github.com/CyanogenMod/android_vendor_cyanogen
https://github.com/pershoot/android_external_yaffs2
https://github.com/CyanogenMod/android_external_yaffs2
https://github.com/solarnz/android_external_yaffs2
https://github.com/pershoot/android_bootable_recovery
https://github.com/CyanogenMod/android_bootable_recovery
https://github.com/solarnz/android_bootable_recovery
https://github.com/SeraphimSerapis/Samsung-P7100-Recovery

-Revert (Partial – ISL29028): sensors: Import sensors from HTC QMR release

Note:
The _gb kernel can only be used on CM Nightly #31 and above, and/or with the needed bits for the newer adreno205 drivers (https://github.com/CyanogenMod/andro…6412317b550521).

This is not to be used on the latest CM7 nightlies. The last nightly that this kernel can be used on is #77.
This is not to be used on HTC Sense (froyo/gingerbread)

Known Issues:
-a slight distortion can be heard when launching the phone app and pressing for the first time the number 1, 4 etc., if volume is set to max.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2632.40_gb-oc-uv-xtra-neon_fp-052111.zip
Download: boot-cm_2632.40_gb-oc-uv-xtra-neon_fp-052111.zip

lib-2632.40_gb.tar.gz (kernel modules)
Download: lib-2632.40_gb.tar.gz

——–

Source:
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/coolbho3k/vision_oc_kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://developer.htc.com
https://github.com/cyanogen/htc-kernel-msm7x30/commits/htc-merge
https://github.com/Kali-/htc-kernel-msm7x30
http://android.git.kernel.org/?p=kernel/msm.git;a=summary