Droid Basement

-merged (from nv-tegra.nvidia.com)
ASoC: tegra: Cross check the connection state on receiving interrupt
ARM: tegra: Avoid timer calibration on slave cpu’s
usb: tegra: otg: add delay for register update
video: tegra: dc: disable windows on dc disable
video:tegra:dc: fix hdcp hotplug issue
video: tegra: dc: reduce HDCP re-negotiation delay
video: tegra: host: Add ioctl to set/get clk rate
video: tegra: dc: clean up dynamic emc code
video: tegra: dc: remove emc clock worker
ARM tegra: gpio: Correct gpio interrupt init sequence
media: video: tegra: reset sclk rate to min

-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you.

Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Bugs:
-Bootup animation sound starts a little bit later (then it was on stock). This is a result of using BFQ.

Things to do:
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, interactive, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*erratas 742230, 742231, 720789 and 743622 applied

10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-101811.zip:
Download: boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-101811.zip

10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-101811.zip:
Download: boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-101811.zip

10.1v (HC 3.1 (seo/isimobile; GT-P7100):
boot-cm_2636.4_p4-oc-xtra-vfpv3-d16_fp-101811.zip:
Download: boot-cm_2636.4_p3-oc-xtra-vfpv3-d16_fp-101811.zip

10.1 3G, Touchwiz UX (HC 3.1 (stock); GT-P7500):
boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-101811.zip:
Download: boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-101811.zip

10.1 LTE (SCH-I905):
boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-101811.zip:
Download: boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-101811.zip

…..

lib-2636.4.tar.gz (Kernel Modules)
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11
https://lkml.org
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.39
http://android.git.kernel.org/?p=kernel/common.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
https://github.com/project-voodoo/samsung-kernel-galaxytab101
https://github.com/stefansaraev
https://github.com/isimobile/galaxy-2636/

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

Note:
-If you want to enable usb charging:
adb shell echo 1 > /sys/class/power_supply/battery/force_usb_charging

To disable:
adb shell echo 0 > /sys/class/power_supply/battery/force_usb_charging

-merged (from cyanogenmod, htc-kernel-msm7x30):
net: wireless: bcm4329: Remove obsolete file
sensor: updated bma150 driver from htc
jbd2: fix fsync() tid wraparound bug

Note:
The _gb kernel can only be used on CM Nightly #78 and above.
This is not to be used on HTC Sense (froyo/gingerbread).
This is not to be used on Froyo.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2635.14_gb-oc-uv-xtra-neon_fp-101211.zip
Download: boot-cm_2635.14_gb-oc-uv-xtra-neon_fp-101211.zip

lib-2635.14_gb.tar.gz (kernel modules)
Download: lib-2635.14_gb.tar.gz

——–

Source:
http://github.com/pershoot/vision-2635
http://github.com/pershoot/vision-2632
http://github.com/pershoot/galaxy-2636
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/Kali-/htc-kernel-msm7x30
http://git.kernel.org/?p=linux/kernel/git/longterm/linux-2.6.35.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
http://developer.htc.com
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.39

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

-a1026: undefine error if defined

-merged (from cyanogenmod, htc-kernel-msm7x30):
net: wireless: bcm4329: Remove obsolete file

-merged (from cyanogenmod, cm-kernel):
msm: Add support for voice call recording

Note:
This is not to be used on Froyo/CM6

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693, 460075 and 743622 applied

boot-cm_2638.8_gb-oc-uv-xtra-btn-aud-ram-neon_fp-101211.zip
Download: boot-cm_2638.8_gb-oc-uv-xtra-btn-aud-ram-neon_fp-101211.zip

lib-2638.8_gb.tar.gz
Download: lib-2638.8_gb.tar.gz

——–

Source:
http://github.com/pershoot/kernel-2638
https://github.com/cyanogenmod/cm-kernel
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/sandbox/dima/android-msm-2.6.38-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/thelogin/n1batcal
http://android.git.kernel.org/?p=kernel/msm.git;a=summary

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor

Battery Calibration:
To calibrate your battery, download and install “battery calibrator” in Market, by Jon Richards.

Then follow this:
http://forum.xda-developers.com/showpost.php?p=9583271&postcount=340

-merged all changes; up and through to 5.0.2.3 from cyanogenmod, android_bootable_recovery[gingerbread].
-p7510: increase recovery_image_partitionsze to accomodate newer recovery

Note:
This should also work on the ‘v’ model.
This will not work on the LTE model.

Known Issues:
-UMS will not work, as of yet.

Download (Fastboot/Nvflash):
recovery-cwm_5.0.2.3-sam-tab-10.1-100411.zip
Download: recovery-cwm_5.0.2.3-sam-tab-10.1-100411.zip

Download (Odin):
recovery-cwm_5.0.2.3-sam-tab-10.1_odin.tar-100411.zip
Download: recovery-cwm_5.0.2.3-sam-tab-10.1_odin.tar-100411.zip

Stock IO Recovery (Fastboot/Nvflash):
Download: recovery.zip

Source:
https://github.com/pershoot/android_device_p7510
https://github.com/pershoot/android_vendor_cyanogen
https://github.com/CyanogenMod/android_vendor_cyanogen
https://github.com/pershoot/android_bootable_recovery
https://github.com/CyanogenMod/android_bootable_recovery
https://github.com/solarnz/android_bootable_recovery
https://github.com/SeraphimSerapis/Samsung-P7100-Recovery

——–

Installation instructions:
Unzip the downloaded file first.

It is reccomended you try out the recovery before replacing your stock recovery.
fastboot boot recovery-cwm_5.0.2.3-sam-tab-10.1.img

If you are happy with it, then to replace your recovery:
fastboot flash recovery recovery-cwm_5.0.2.3-sam-tab-10.1.img

Nvflash:
nvflash –bl bootloader.bin –go
nvflash –resume –download 8 recovery-cwm_5.0.2.3-sam-tab-10.1.img

Odin:
Go in to download mode, launch Odin Multi Download, select recovery.tar.md5 (this is what you get after unzipping from recovery-cwm_5.0.2.3-sam-tab-10.1_odin.tar-100411.zip) and flash.

Update (10/3; p3 and p4-ux):
tegra: usb: p4: set xcvr_setup back to 13 for utmip config

…..

-defconfig: p4wifi: set USB_ANDROID_ACCESSORY
-p4lte: merge changes from SCH-I905 ‘Update 1’
-p4: merge changes from SCH-I905 ‘Update 1’
-p4wifi: merge changes from SCH-I905 ‘Update 1’
-various: merge in changes from SCH-I905 ‘Update 1’

-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you.

Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Bugs:
-Bootup animation sound starts a little bit later (then it was on stock). This is a result of using BFQ.

Things to do:
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, interactive, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*erratas 742230, 742231, 720789 and 743622 applied

10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-093011.zip:
Download: boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-093011.zip

10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-093011.zip:
Download: boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-093011.zip

10.1v (HC 3.1 (seo/isimobile; GT-P7100):
boot-cm_2636.4_p4-oc-xtra-vfpv3-d16_fp-100311.zip:
Download: boot-cm_2636.4_p3-oc-xtra-vfpv3-d16_fp-100311.zip

10.1 3G, Touchwiz UX (HC 3.1 (stock); GT-P7500):
boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-100311.zip:
Download: boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-100311.zip

10.1 LTE (SCH-I905):
boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-093011.zip:
Download: boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-093011.zip

…..

lib-2636.4.tar.gz (Kernel Modules)
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11
https://lkml.org
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.39
http://android.git.kernel.org/?p=kernel/common.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
https://github.com/project-voodoo/samsung-kernel-galaxytab101
https://github.com/stefansaraev
https://github.com/isimobile/galaxy-2636/

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

Note:
-If you want to enable usb charging:
adb shell echo 1 > /sys/class/power_supply/battery/force_usb_charging

To disable:
adb shell echo 0 > /sys/class/power_supply/battery/force_usb_charging

-defconfig: p4/p3-p7100: set USB_ANDROID_ACCESSORY

-merged (from nv-tegra):
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
tegra: HDMI: add underscan capability exposure via sysfs
usb: gadget: fsl: add proper handling of udc pullup
video: tegra: Fixed wrong aspect ratio information
video: tegra: dc: Fix wrong handling of dc enable.
video: tegra: dc: Update hdmi hot-plug status on resume

-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you.

Known Issues:
-If you use a dock, you may experience an unresponsive touchscreen and wifi connection. *investigating..

Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Bugs:
-Bootup animation sound starts a little bit later (then it was on stock). This is a result of using BFQ.

Things to do:
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, interactive, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*erratas 742230, 742231, 720789 and 743622 applied

10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-091311.zip:
Download: boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-091311.zip

10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-091311.zip:
Download: boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-091311.zip

10.1v (HC 3.1 (seo/isimobile; GT-P7100):
boot-cm_2636.4_p4-oc-xtra-vfpv3-d16_fp-091311.zip:
Download: boot-cm_2636.4_p3-oc-xtra-vfpv3-d16_fp-091311.zip

10.1 3G, Touchwiz UX (HC 3.1 (stock); GT-P7500):
boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-091311.zip:
Download: boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-091311.zip

10.1 LTE (SCH-I905):
boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-091311.zip:
Download: boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-091311.zip

…..

lib-2636.4.tar.gz (Kernel Modules)
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11
https://lkml.org
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.39
http://android.git.kernel.org/?p=kernel/common.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
https://github.com/project-voodoo/samsung-kernel-galaxytab101
https://github.com/stefansaraev
https://github.com/isimobile/galaxy-2636/

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

Note:
-If you want to enable usb charging:
adb shell echo 1 > /sys/class/power_supply/battery/force_usb_charging

To disable:
adb shell echo 0 > /sys/class/power_supply/battery/force_usb_charging

This attempts to remediate/work around android.process.media sticking around using high system/cpu utilisation.

It runs at intervals of 5 minutes, and is persistent ->

If android.process.media is greater then 25% utilisation, force kill it.
If the above is true, and system_server is greater then 15%, gracefully kill it.

Log is in /data/local/tmp/log/watch_media.log

Installation Instructions:
Flash in recovery.

Things to do:
-calculate time in space for process before killing.
-dont force kill right away; attempt more graceful methods first.

watch_media.zip
Download: watch_media-091111.zip

-cpufreq: interactive: adjust thresholds
-defconfig: add interactive governor
-cpufreq: ondemand: adjust thresholds
-usb: gadget: add accessory from SCH-I905_VZW
-defconfig: p4lte: set USB_ANDROID_ACCESSORY
-tegra: dc: nvhdcp: undefine SAMSUNG_SW_I2C, VERBOSE_DEBUG, remove five_s and use check is_err_or_null(buf) in get_ksvfifo

-remove:
p3-p7100: revert some p3 usb stuff

-revert:
usb: Realloc xHCI structures after a hub is verified.

-merged (from stefansaraev):
p3_battery: enable usb charging
p3-p7100: phy pdata: restore vbus irq

-merged (from isimobile):
p3-p7100: Removed .currentlimit_irq not required for P3

Note:
-If you want to enable usb charging:
adb shell echo 1 > /sys/class/power_supply/battery/force_usb_charging

To disable:
adb shell echo 0 > /sys/class/power_supply/battery/force_usb_charging

-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you.

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Bugs:
-Bootup animation sound starts a little bit later (then it was on stock). This is a result of using BFQ.

Things to do:
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, interactive, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-091011.zip:
Download: boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-091011.zip

10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-091011.zip:
Download: boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-091011.zip

10.1v (HC 3.1 (seo/isimobile; GT-P7100):
boot-cm_2636.4_p4-oc-xtra-vfpv3-d16_fp-091011.zip:
Download: boot-cm_2636.4_p3-oc-xtra-vfpv3-d16_fp-091011.zip

10.1 3G, Touchwiz UX (HC 3.1 (stock); GT-P7500):
boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-091011.zip:
Download: boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-091011.zip

10.1 LTE (SCH-I905):
boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-091011.zip:
Download: boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-091011.zip

…..

lib-2636.4.tar.gz (Kernel Modules)
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11
https://lkml.org
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.39
http://android.git.kernel.org/?p=kernel/common.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
https://github.com/project-voodoo/samsung-kernel-galaxytab101
https://github.com/stefansaraev
https://github.com/isimobile/galaxy-2636/

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

-user newer source from opensource.samsung.com as a base (KG3)
-overhaul and re-merge from galaxy-2636
-build NFS (modular)
-unset BLK_DEV_BSG and BLK_DEV_INTEGRITY
-fixup: p3-p7100: p3_battery: low battery compensation offset
-add LTE support

Note:
-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you. I will most likely flash this in myself and yank it from the ramdisk moving forward.

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Bugs:
-Bootup animation sound starts a little bit later (then it was on stock). This is a result of using BFQ.

Things to do:
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-090411.zip:
Download: boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-090411.zip

10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-090411.zip:
Download: boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-090411.zip

10.1v (HC 3.1 (seo/isimobile; GT-P7100):
boot-cm_2636.4_p4-oc-xtra-vfpv3-d16_fp-090411.zip:
Download: boot-cm_2636.4_p3-oc-xtra-vfpv3-d16_fp-090411.zip

10.1 3G, Touchwiz UX (HC 3.1 (stock); GT-P7500):
boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-090411.zip:
Download: boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-090411.zip

10.1 LTE (GT-P7510):
boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-090411.zip:
Download: boot-cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-090411.zip

…..

lib-2636.4.tar.gz (Kernel Modules)
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11
https://lkml.org
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.39
http://android.git.kernel.org/?p=kernel/common.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
https://github.com/project-voodoo/samsung-kernel-galaxytab101
https://github.com/stefansaraev

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

-merge up to kernel.org’s 2.6.32.46
-set JRCU_LAZY
-unset a8 erratas
-Revert “TTY: ldisc, do not close until there are readers”
-add T8 update

-merged (from cyanogenmod, lge-kernel-star):
tegra: Halt AVP when entering suspend
USB: Remove serial functions from RNDIS composition

-merged (from galaxy-2636):
serial: 8250: remove ‘too much work for irq’, printk

If you are using any of the external modules, please download them fresh and re-push them in to place.

Note:
-If you are on the stock rom/stock’ish rom (froyo), set your wifi to never sleep.
-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock/stock’ish rom).

Known Issues:
-warning from manage irq and nvec release function
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.46_gb-oc-uv-xtra-vfp_fp-083111.zip
Download: boot-cm_2632.46_gb-oc-uv-xtra-vfp_fp-083111.zip

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

ViewSonic Gtab/Malata Zpad [New Bootloader] (Gingerbread):
boot-cm_2632.46_gb_newbl-oc-uv-xtra-vfp_fp-083111.zip
Download: boot-cm_2632.46_gb_newbl-oc-uv-xtra-vfp_fp-083111.zip

Malata Zpad T8 (Gingerbread):
boot-cm_2632.46_gb_newbl-oc-uv-xtra-vfp_fp-083111.zip
Download: boot-cm_2632.46_gb_zpad_t8-oc-uv-xtra-vfp_fp-083111.zip

——–

lib-2632.46_gb.tar.gz (kernel modules)
Download: lib-2632.46_gb.tar.gz

<><><>

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30
http://github.com/CyanogenMod/cm-kernel
https://github.com/CyanogenMod/lge-kernel-star
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.36
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/mblaster/linux_2.6.32_folio100
https://github.com/Cpasjuste/android_kernel_lg_p990
https://github.com/Kali-/htc-kernel-msm7x30
http://android.git.kernel.org/?p=kernel/msm.git;a=summary
https://github.com/ratanakvlun/gtab-2632
http://github.com/pershoot/vision-2635
http://patchwork.kernel.org

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.46.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.46-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.46-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.46-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

Overclocking-
How-To:
-Install the latest SetCPU from the market and/or XDA (http://forum.xda-developers.com/showthread.php?t=505419)
-Select auto
-If using CM7, then you can use the included CPU Settings within CyanogenMod Settings.

Note:
If you were using SetCPU prior, with ‘custom’ and this kernel set, please go to device selection and select auto. Please delete the custom setcpu file on your filesystem:

adb shell rm /data/local/setcpu

Note2:
Be aware, that if you leave it pinned to max, hammering it, it will get warm/warmer then your used to at 1GHZ, pinned.
It is advised not to select any of the 2 governor’s listed (but, at the very least, not performance).
It is advised to keep your min value at 216.