Update: (6/02; the filename has not changed. please re-download and re-flash):
-defconfig: enable SERIAL_MSM_HS_PURE_ANDROID and SERIAL_BCM_BT_LPM

…..

Kernel 2.6.35.13 – OC-UV-NEON_FP (1.516GHZ) – G2

-based off of HTC’s ace-2.6.35-gb-MR (developer.htc.com) and supplied msm7230_defconfig (2.6.35.10)
-merged up to kernel.org’s 2.6.35.13
-merged in coolbh3k’s/cyanogen’s oc patch
-frequency range is from 806 to 1516; default bootup is 245-806.
-undervolt all frequencies (max mv is 1300)
-merged in zinx’s GAN_ETH wifi calling module modifications
-merged in changes from cyanogen’s htc-kernel-msm7x30, and pershoot’s vision-2632
-optimisations based off of .32 release from Vision.
-added/amended a few things to the config (-xtra (please see below and in github)).
-import autogroup (session) from 2.6.38

Note:
The _gb kernel can only be used on CM Nightly #78 and above.
This is not to be used on HTC Sense (froyo/gingerbread).
This is not to be used on Froyo.

Known Issue:
If you are in the EU, you may not see APs outside of channel 11 (wifi). This will be worked around in the next release.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2635.13_gb-oc-uv-xtra-neon_fp-060111.zip
Download: boot-cm_2635.13_gb-oc-uv-xtra-neon_fp-060111.zip

lib-2635.13_gb.tar.gz (kernel modules)
Download: lib-2635.13_gb.tar.gz

——–

Source:
http://github.com/pershoot/vision-2635
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
http://git.kernel.org/?p=linux/kernel/git/longterm/linux-2.6.35.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

« »