Droid Basement

-merge up to kernel.org’s 2.6.32.46
-set JRCU_LAZY
-unset a8 erratas
-Revert “TTY: ldisc, do not close until there are readers”
-add T8 update

-merged (from cyanogenmod, lge-kernel-star):
tegra: Halt AVP when entering suspend
USB: Remove serial functions from RNDIS composition

-merged (from galaxy-2636):
serial: 8250: remove ‘too much work for irq’, printk

If you are using any of the external modules, please download them fresh and re-push them in to place.

Note:
-If you are on the stock rom/stock’ish rom (froyo), set your wifi to never sleep.
-At sleep, if you have the USB cable plugged in and find that you cannot wake the device, unplug, and press power to wake (this is more prevalent on the stock/stock’ish rom).

Known Issues:
-warning from manage irq and nvec release function
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute (stock rom).
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.46_gb-oc-uv-xtra-vfp_fp-083111.zip
Download: boot-cm_2632.46_gb-oc-uv-xtra-vfp_fp-083111.zip

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

ViewSonic Gtab/Malata Zpad [New Bootloader] (Gingerbread):
boot-cm_2632.46_gb_newbl-oc-uv-xtra-vfp_fp-083111.zip
Download: boot-cm_2632.46_gb_newbl-oc-uv-xtra-vfp_fp-083111.zip

Malata Zpad T8 (Gingerbread):
boot-cm_2632.46_gb_newbl-oc-uv-xtra-vfp_fp-083111.zip
Download: boot-cm_2632.46_gb_zpad_t8-oc-uv-xtra-vfp_fp-083111.zip

——–

lib-2632.46_gb.tar.gz (kernel modules)
Download: lib-2632.46_gb.tar.gz

<><><>

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30
http://github.com/CyanogenMod/cm-kernel
https://github.com/CyanogenMod/lge-kernel-star
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.36
http://android.git.kernel.org/?p=kernel/common.git;a=summary
https://github.com/mblaster/linux_2.6.32_folio100
https://github.com/Cpasjuste/android_kernel_lg_p990
https://github.com/Kali-/htc-kernel-msm7x30
http://android.git.kernel.org/?p=kernel/msm.git;a=summary
https://github.com/ratanakvlun/gtab-2632
http://github.com/pershoot/vision-2635
http://patchwork.kernel.org

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.46.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.46-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.46-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.46-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

Overclocking-
How-To:
-Install the latest SetCPU from the market and/or XDA (http://forum.xda-developers.com/showthread.php?t=505419)
-Select auto
-If using CM7, then you can use the included CPU Settings within CyanogenMod Settings.

Note:
If you were using SetCPU prior, with ‘custom’ and this kernel set, please go to device selection and select auto. Please delete the custom setcpu file on your filesystem:

adb shell rm /data/local/setcpu

Note2:
Be aware, that if you leave it pinned to max, hammering it, it will get warm/warmer then your used to at 1GHZ, pinned.
It is advised not to select any of the 2 governor’s listed (but, at the very least, not performance).
It is advised to keep your min value at 216.

Update (0829; the filename has not changed. please re-download and re-flash):
-re-merge:
serial: 8250: remove ‘too much work for irq’, printk

-refresh all update.zip’s

…..

Update (0827; the filename has not changed. please re-download and re-flash):
-remove:
p3-p7100: revert p3_wakeup_key
p3-p7100: remove hwrev check

-merged (from stefansaraev)
p3-p7100: revert some p3 usb stuff
smd-hsic: correct 3g traffic counter

-refresh p3 and p4-ux update.zip’s

…..

-remove-
tegra: p3-p7100: switch back to p3 gpio

-tegra: p3-p7100: add p3 gpio tp p4
-serial: 8250: remove ‘too much work for irq’, printk, for P4/P4WIFI
-re-merge:
Revert: arm: tegra: p4wifi/p4: dynamic cpufreq governor

-merged (from nvidia):
usb: fsl_udc: Resume of device mode optimized.
i2c: tegra: Added arbitration lost error recovery
arm: tegra: Updated i2c platform data
arm: tegra: Added I2C arbitration lost recovery mechanism
spi: tegra: Supporting HW based CS control
spi: tegra: Spi controller configured during device setup
ARM: Tegra: removed ‘\n’ before counting fuse len
i2c: tegra: Remove warnings

-merged (from stefansaraev):
p3-p7100: wakeup fixes
p3-p7100: revert p3_wakeup_key
p3-p7100: remove hwrev check

-merged (from android.git.kernel.org)
fuse: Freeze client on suspend when request sent to userspace

Note:
-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you. I will most likely flash this in myself and yank it from the ramdisk moving forward.

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Bugs:
-Bootup animation sound starts a little bit later (then it was on stock). This is a result of using BFQ.

Things to do:
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-082611.zip:
Download: boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-082611.zip

10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-082611.zip:
Download: boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-082611.zip

10.1v (HC 3.1 (seo/isimobile; GT-P7100):
boot-cm_2636.4_p4-oc-xtra-vfpv3-d16_fp-082611.zip:
Download: boot-cm_2636.4_p3-oc-xtra-vfpv3-d16_fp-082611.zip

10.1 3G, Touchwiz UX (HC 3.1 (stock); GT-P7500):
boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-082611.zip:
Download: boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-082611.zip

…..

lib-2636.4.tar.gz (Kernel Modules)
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11
https://lkml.org
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.39
http://android.git.kernel.org/?p=kernel/common.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
https://github.com/project-voodoo/samsung-kernel-galaxytab101
https://github.com/stefansaraev

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

-re-work ‘master’; merge additions from ‘re-work’ and abandon
-reduce SND_VOODOO_HP_LEVEL to 42
-backlight: cm623: lower sensitity (Vlad_z)
-build TUN as modular

-remove:
alarm: disable rtc alarm suspend/resume handlers
arm: tegra: fsl: correcting the vbus status
ARM: tegra: pm: save/restore ahb bus registers
ARM: tegra: restore voltage to nominal when reboot
usb: misc: out-of-band wake for usb devices
Regulator: add suspend-finish API for regulator core.
regulator: Copy constraints from regulators when initialising them
regulator: enable supply regulator only when use count is zero
ASOC: tegra: Enable/disable regulator vmic when recording with d-mic
ARM: Tegra: Sh532u: Add focus motor state check
Revert “mm: fix migration hangs on anon_vma lock”
Revert “memcg: fix account leak at failure of memsw acconting”

-merged (from nvidia):
arm: tegra: clock: Reading APB bus before disabling clock

-merged (from stefansaraev):
p4/p4wifi: remove upload mode

Note:
-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you. I will most likely flash this in myself and yank it from the ramdisk moving forward.

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Bugs:
-Bootup animation sound starts a little bit later (then it was on stock). This is a result of using BFQ.

Things to do:
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-081911.zip:
Download: boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-081911.zip

10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-081911.zip:
Download: boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-081911.zip

10.1v (HC 3.1 (seo/isimobile; GT-P7100):
boot-cm_2636.4_p4-oc-xtra-vfpv3-d16_fp-081911.zip:
Download: boot-cm_2636.4_p3-oc-xtra-vfpv3-d16_fp-081911.zip

10.1 3G, Touchwiz UX (HC 3.1 (stock); GT-P7500):
boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-081911.zip:
Download: boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-081911.zip

…..

lib-2636.4.tar.gz (Kernel Modules)
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11
https://lkml.org
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.39
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
https://github.com/project-voodoo/samsung-kernel-galaxytab101
https://github.com/stefansaraev

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

Update (8/17; the filename has not changed. please re-download and re-flash):
-input: touchscreen: atmel_mxt1386: increase msleep after reset to normal

…..

-re-build kernel from the ground up (re-work branch).
-commence merging back in nvidia patches.
-cpufreq: ondemand: adjust thresholds
-reduce core_speedo nominal mv

-merged (from nvidia):
media: video: tegra: avp: set sclk to min

-merged (from patchwork.kernel.org):
tegra: cpu: Optimize cpufreq transition latency

-merged (from stefansaraev):
drivers: power: p3_battery: remove maxim fullcap shits
drivers: power: p3_battery: export batt_current to sysfs
p3_battery: p4/p4wifi: low battery compensation offset

Note:
-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you. I will most likely flash this in myself and yank it from the ramdisk moving forward.

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).

Bugs:
-Bootup animation sound starts a little bit later (then it was on stock). This is a result of using BFQ.

Things to do:
Continue merging back in nvidia patches
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-081611.zip:
Download: boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-081611.zip

10.1-Wifi, Touchwiz UX (OTA, GT-P7510):
boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-081611.zip:
Download: boot-cm_2636.4_ux-oc-xtra-vfpv3-d16_fp-081611.zip

10.1 3G, Touchwiz UX (HC 3.1 (stock); GT-P7500):
boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-081611.zip:
Download: boot-cm_2636.4_p4_ux-oc-xtra-vfpv3-d16_fp-081611.zip

…..

lib-2636.4.tar.gz (Kernel Modules)
Download: lib-2636.4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11
https://lkml.org
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.39
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
https://github.com/project-voodoo/samsung-kernel-galaxytab101
https://github.com/stefansaraev

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

Update (0803; the filename has not changed. please re-download and re-flash):
-revert:
rcu: Inform the user about dynticks idle mode on PROVE_RCU warning

…..

-msm7x30: acpuclock: increase voltages (1113, 1152, 1267, 1286, 1324 and 1344)

Note:
The _gb kernel can only be used on CM Nightly #78 and above.
This is not to be used on HTC Sense (froyo/gingerbread).
This is not to be used on Froyo.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2635.14_gb-oc-uv-xtra-neon_fp-080211.zip
Download: boot-cm_2635.14_gb-oc-uv-xtra-neon_fp-080211.zip

lib-2635.14_gb.tar.gz (kernel modules)
Download: lib-2635.14_gb.tar.gz

——–

Source:
http://github.com/pershoot/vision-2635
http://github.com/pershoot/vision-2632
http://github.com/pershoot/galaxy-2636
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/Kali-/htc-kernel-msm7x30
http://git.kernel.org/?p=linux/kernel/git/longterm/linux-2.6.35.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
http://developer.htc.com
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.39

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

Update (0803; the filename has not changed. please re-download and re-flash):
-add 10.1v
-revert:
rcu: Inform the user about dynticks idle mode on PROVE_RCU warning

…..

-defconfig: p4wifi: unset VIDEO_IMX073
-defconfig: add pershoot_samsung_p4_defconfig (based off of pershoot_samsung_p4wifi_defconfig

-revert:
cgroups: export cgroup_iter_{start,next,end}
cgroups: introduce timer slack subsystem
defconfig: set CGROUP_TIMER_SLACK

-merged (from stefansaraev, gtab-p7100-3.1-kernel)
tegra: p4: add changes from p4wifi
tegra: p4: orientation fix
tegra: p4: sdi bat
tegra: p4: p3 gpio
tegra: p4: proper imx073 & s5k5bbgx support
tegra: p4: revert 3.0.1 sensors.p3, we need it for light sensor
tegra: p4: sensor fixes

Note:
-If you want to bench, it is advised that you set min/max to the same number.
-For Custom roms: Be aware, I’ve put the wifi module right in the ramdisk (which is where it is on 10.1 stock). Please move over the modules folder in /system/lib prior to flashing, if this applies to you. I will most likely flash this in myself and yank it from the ramdisk moving forward.
-This will not work for TouchWiz UX

Known Issues:
Issues from Stock to be resolved:
-Slight delay on wakeup (introduced in HC 3.1) when not plugged in, and/or having to press power up to two times to wakeup (rare (if it is busy doing something)).
-Bootup animation sound starts a little bit later (then it was on stock).

Things to do:
Undervolt low/mid ranges
Implement UMS

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*erratas 742230, 742231, 720789 and 743622 applied

10.1-Wifi (GT-P7510):
boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-080211.zip:
Download: boot-cm_2636.4-oc-xtra-vfpv3-d16_fp-080211.zip

lib-2636.4.tar.gz
Download: lib-2636.4.tar.gz

10.1v (HC 3.1; GT-P7100):
boot-cm_2636.4_p4-oc-xtra-vfpv3-d16_fp-080211.zip:
Download: boot-cm_2636.4_p4-oc-xtra-vfpv3-d16_fp-080211.zip

lib-2636.4_p4.tar.gz
Download: lib-2636.4_p4.tar.gz

——–

Source:
http://github.com/pershoot/galaxy-2636
http://github.com/pershoot/vision-2635
http://github.com/pershoot/gtab-2632
http://opensource.samsung.com
https://github.com/clemsyn/UpdatedTF101-OCkernel
https://github.com/ibladesi/TF101-HighOC
https://github.com/tiamat-aosp
https://github.com/netarchy/android_kernel_TF101
https://github.com/coolbho3k/Xoom-OC
https://github.com/BuzzBumbleBee/android_kernel_TF101
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-12r3
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/dev-hc
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/heads/rel-2010-11
https://lkml.org
http://android.git.kernel.org/?p=kernel/tegra.git;a=shortlog;h=refs/heads/android-tegra-2.6.39
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
https://github.com/project-voodoo/samsung-kernel-galaxytab101
https://github.com/stefansaraev/gtab-p7100-3.1-kernel

——–

Installation Instructions:

Flash in recovery.

Download the latest SetCPU from this thread:
http://forum.xda-developers.com/showthread.php?t=505419

Launch it, accept root allowance and select autodetect.
ondemand will be the default governor

To install kernel modules:
Use Winrar (windows) or tar with the z option and unpack lib-2636.4.tar.gz
Push any module you desire to /data/local/modules (this is created by the update.zip)
Then, insmod it (you can do this via adb, in a gscript, or on the device in terminal.

Update (08/02; the filename has not changed. please re-download and re-flash):
-revert:
cgroups: export cgroup_iter_{start,next,end}
cgroups: introduce timer slack subsystem
defconfig: set CGROUP_TIMER_SLACK

…..

-merged up to kernel.org’s, 2.6.35.14
-defconfig: set CGROUP_TIMER_SLACK

-merged (from cyanogenmod, htc-kernel-msm7x30):
Fix vision buttons backlight brightness (replay I3b0edb96)
msm: adsp: qdsp5v2: Increase retry duration to 15msecs.
msm: Support for voice call recording

-merged (from galaxy-2636):
rcu: Inform the user about dynticks idle mode on PROVE_RCU warning
cgroups: export cgroup_iter_{start,next,end}
cgroups: introduce timer slack subsystem

Note:
The _gb kernel can only be used on CM Nightly #78 and above.
This is not to be used on HTC Sense (froyo/gingerbread).
This is not to be used on Froyo.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*autogroup (session) support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2635.13_gb-oc-uv-xtra-neon_fp-080111.zip
Download: boot-cm_2635.14_gb-oc-uv-xtra-neon_fp-080111.zip

lib-2635.14_gb.tar.gz (kernel modules)
Download: lib-2635.14_gb.tar.gz

——–

Source:
http://github.com/pershoot/vision-2635
http://github.com/pershoot/vision-2632
http://github.com/pershoot/galaxy-2636
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/Kali-/htc-kernel-msm7x30
http://git.kernel.org/?p=linux/kernel/git/longterm/linux-2.6.35.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.38.y.git;a=summary
http://developer.htc.com
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.39

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.