Archive for February, 2011


-reconstructed source from scratch (cleaned up unused files,test files, etc., from tapntap’s patch) against nvidia’s tegra-10.8.2, re-merged up to nvidia’s tegra-10.9.8 and re-merged up to kernel.org’s 2.6.32.29.
-Brought in various changes from vision-2632/kernel-2635, cyanogenmod and AOSP’s github trees.

-enabled UID_STAT (as per nvidia’s d8e710f691dc0986e385b2cf6d8110f2f0766569)

-merged (from android.git.kernel.org common):
staging: binder: Fix use of uninitialized variable.

-merged (from nv-tegra.nvidia.com <= tegra-10.9.8): tegra sdhci: Restore SDHCI interrupts on resume [ARM/tegra] power: Fixed assert in suspend init. [ARM/tegra] RM: Restored core lock sysfs node. [arm/tegra] Support for Wake-On-Wireless Event. In order for UMS (USB mount) to work on Gingerbread, this must be reverted: https://github.com/CyanogenMod/android_device_harmony/commit/f51f9e2a1037b4e3fb1a

If you are using any of the external modules, please download them fresh and re-push them in to place.

Known Issues:
-warning from sysfs group for cpufreq, manage irq and nvec release
-unable to see ondemand and interactive governor choices in sysfs cpufreq governors list
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute.
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-backport AOSP’s frequency scaling
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.29-xtra-vfpv3_fp-022311.zip
Download: boot-cm_2632.29-xtra-vfpv3_fp-022311.zip

lib-2632.29.tar.gz (kernel modules)
Download: lib-2632.29.tar.gz

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.29_gb-xtra-vfpv3_fp-022311.zip
Download: boot-cm_2632.29_gb-xtra-vfpv3_fp-022311.zip

lib-2632.29_gb.tar.gz (kernel modules)
Download: lib-2632.29_gb.tar.gz

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

——–

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.28.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.28-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

Update (2/19 (the filename has not changed; please re-download and re-flash)):
-merged (from android.git.kernel.org common):
USB: gadget: android: Fix problem switching vendor IDs (gingerbread)

…..

Update (2/19 (the filename has not changed; please re-download and re-flash)):
-merged (from android.git.kernel.org common):
net: wireless: bcm4329: Fix disable pno call
USB: gadget: f_adb: dequeue request on error in adb_read (gingerbread)

…..

-merge up to kernel.org’s 2.6.32.29
-defconfig: enable TEGRA_USB_VBUS_DETECT_BY_PMU

-merged (from nv-tegra.nvidia.com <=tegra-10.9.8): sdhci-tegra:Passing the correct handle to read/write macros. sdhci-tegra:Detect SD cards inserted during suspend. sdhci-tegra: Optimizing sdio suspend handler [ARM/tegra] RM: Disabled 3D power gating in LP1. [ARM/tegra] RM: Stopped DVFS in PM_SUSPEND_PREPARE. In order for UMS (USB mount) to work on Gingerbread, this must be reverted: https://github.com/CyanogenMod/android_device_harmony/commit/f51f9e2a1037b4e3fb1a

If you are using any of the external modules, please download them fresh and re-push them in to place.

Known Issues:
-warning from sysfs group for cpufreq, manage irq and nvec release
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute.
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-backport AOSP’s frequency scaling
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.29-xtra-vfpv3_fp-021811.zip
Download: boot-cm_2632.29-xtra-vfpv3_fp-021811.zip

lib-2632.29.tar.gz (kernel modules)
Download: lib-2632.29.tar.gz

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.29_gb-xtra-vfpv3_fp-021811.zip
Download: boot-cm_2632.29_gb-xtra-vfpv3_fp-021811.zip

lib-2632.29_gb.tar.gz (kernel modules)
Download: lib-2632.29_gb.tar.gz

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

——–

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.28.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.28-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

Update (2/19 (the filename has not changed; please re-download and re-flash)):
-merged (from android.git.kernel.org common):
USB: gadget: android: Fix problem switching vendor IDs (gingerbread)

…..

Update (2/19 (the filename has not changed; please re-download and re-flash)):
-merged (from android.git.kernel.org common):
net: wireless: bcm4329: Fix disable pno call
USB: gadget: f_adb: dequeue request on error in adb_read (gingerbread)

Known Issues:
-a slight distortion can be heard when launching the phone app and pressing for the first time the number 1, 4 etc., if volume is set to max.

…..

Update (the filename has not changed; please re-download and re-flash):
-msm: qdsp5v2: sync marimba_profile.h from cyanogenmod’s htc-kernel-msm7x30

…..

-merge up to kernel.org’s 2.6.32.29

Note:
This is not to be used on HTC Sense (froyo/gingerbread)

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2632.29_gb-oc-uv-xtra-neon_fp-021811.zip
Download: boot-cm_2632.29_gb-oc-uv-xtra-neon_fp-021811.zip

lib-2632.29_gb.tar.gz (kernel modules)
Download: lib-2632.29_gb.tar.gz

Froyo:
boot-cm_2632.29-oc-uv-xtra-neon_fp-021811.zip
Download: boot-cm_2632.29-oc-uv-xtra-neon_fp-021811.zip

lib-2632.29.tar.gz (kernel modules)
Download: lib-2632.29.tar.gz

——–

Source:
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/coolbho3k/vision_oc_kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

-net: wireless: bcm4329: add BCM4329_ENABLE_PNO_SUPPORT
-defconfig: enable PNO_SUPPORT for bcm4329 (gingerbread)

-merged (from android.git.kernel.org common):
USB: gadget: android: Support switching vendor ID when configuration changes (gingerbread)
USB: gadget: f_mtp: Don’t block in mtp_send_event (gingerbread)
PM: Increase dpm suspend timeout
net: wireless: bcm4329: Add sdlock to firmware loading
net: wireless: bcm4329: Fix memleak in dev->p
net: wireless: bcm4329: Fix mem leak in wl_iw_handle_scanresults_ies
net: wireless: bcm4329: Update to version 4.218.248-23
net: wireless: Add get_country_code functionality to platform
net: wireless: bcm4329: Get country translation from platform data

In order for UMS (USB mount) to work on Gingerbread, this must be reverted:
https://github.com/CyanogenMod/android_device_harmony/commit/f51f9e2a1037b4e3fb1a

If you are using any of the external modules, please download them fresh and re-push them in to place.

Known Issues:
-warning from sysfs group for cpufreq
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute.
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-backport AOSP’s frequency scaling
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.28-xtra-vfpv3_fp-021611.zip
Download: boot-cm_2632.28-xtra-vfpv3_fp-021611.zip

lib-2632.28.tar.gz (kernel modules)
Download: lib-2632.28.tar.gz

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.28_gb-xtra-vfpv3_fp-021611.zip
Download: boot-cm_2632.28_gb-xtra-vfpv3_fp-021611.zip

lib-2632.28_gb.tar.gz (kernel modules)
Download: lib-2632.28_gb.tar.gz

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

——–

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.28.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.28-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

-net: wireless: bcm4329: add BCM4329_ENABLE_PNO_SUPPORT
-defconfig: enable PNO_SUPPORT for bcm4329 (gingerbread)

-merged (from android.git.kernel.org common):
USB: gadget: android: Support switching vendor ID when configuration changes (gingerbread)
USB: gadget: f_mtp: Don’t block in mtp_send_event (gingerbread)
PM: Increase dpm suspend timeout
net: wireless: bcm4329: Add sdlock to firmware loading
net: wireless: bcm4329: Fix memleak in dev->p
net: wireless: bcm4329: Fix mem leak in wl_iw_handle_scanresults_ies
net: wireless: bcm4329: Update to version 4.218.248-23
net: wireless: Add get_country_code functionality to platform
net: wireless: bcm4329: Get country translation from platform data

Note:
This is not to be used on HTC Sense (froyo/gingerbread)

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2632.28_gb-oc-uv-xtra-neon_fp-021611.zip
Download: boot-cm_2632.28_gb-oc-uv-xtra-neon_fp-021611.zip

lib-2632.28_gb.tar.gz (kernel modules)
Download: lib-2632.28_gb.tar.gz

Froyo:
boot-cm_2632.28-oc-uv-xtra-neon_fp-021611.zip
Download: boot-cm_2632.28-oc-uv-xtra-neon_fp-021611.zip

lib-2632.28.tar.gz (kernel modules)
Download: lib-2632.28.tar.gz

——–

Source:
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/coolbho3k/vision_oc_kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

-defconfig: enable low memory killer
-touchscreen: adjust sample rate (randallu)

-merged (from android.git.kernel.org common):
cgroup: Set CGRP_RELEASABLE when adding to a cgroup
cgroup: Remove call to synchronize_rcu in cgroup_attach_task
lowmemorykiller: don’t unregister notifier from atomic context
staging: android: lowmemorykiller: Don’t wait more than one second for a process to die
staging: android: lowmemorykiller: Ignore shmem pages in page-cache
usb: gadget: Fixed Android gadget function discovery & product matching (gingerbread)
usb: gadget: Multiple ACM gadget instances (gingerbread)
USB: gadget: android Fix gadget descriptor compliance for IAD’s (gingerbread)
USB: gadget: composite: Dynamically set IAD bFirstInterface (gingerbread)

In order for UMS (USB mount) to work on Gingerbread, this must be reverted:
https://github.com/CyanogenMod/android_device_harmony/commit/f51f9e2a1037b4e3fb1a

If you are using any of the external modules, please download them fresh and re-push them in to place.

Known Issues:
-warning from sysfs group for cpufreq
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute.
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-backport AOSP’s frequency scaling
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.28-xtra-vfpv3_fp-020811.zip
Download: boot-cm_2632.28-xtra-vfpv3_fp-020811.zip

lib-2632.28.tar.gz (kernel modules)
Download: lib-2632.28.tar.gz

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.28_gb-xtra-vfpv3_fp-020811.zip
Download: boot-cm_2632.28_gb-xtra-vfpv3_fp-020811.zip

lib-2632.28_gb.tar.gz (kernel modules)
Download: lib-2632.28_gb.tar.gz

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

——–

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.28.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.28-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.

-merged (from android.git.kernel.org common):
USB: gadget: f_mtp: Fix problems transferring files from device to host
usb: gadget: Fixed Android gadget function discovery & product matching
usb: gadget: Multiple ACM gadget instances
USB: gadget: android Fix gadget descriptor compliance for IAD’s
USB: gadget: composite: Dynamically set IAD bFirstInterface

Note:
This is not to be used on HTC Sense (froyo/gingerbread)

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

Gingerbread:
boot-cm_2632.28_gb-oc-uv-xtra-neon_fp-020811.zip
Download: boot-cm_2632.28_gb-oc-uv-xtra-neon_fp-020811.zip

lib-2632.28_gb.tar.gz (kernel modules)
Download: lib-2632.28_gb.tar.gz

——–

Source:
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/coolbho3k/vision_oc_kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

-merged (from android.git.kernel.org common):
cpufreq: Prevent memory leak in cpufreq_stats on hotplug

-rebase to kernel.org’s 2.6.35.11

Note:
This is not to be used on Gingerbread/CM7 RC0

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip
nfs_32b_radio2708.zip

Known Issues:
-At sleep, you may not get all the way down to 122, although this is what has been specified. This is being investigated.
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.11_ds_32b-oc-uv-xtra-ram-fp-020711.zip
Download: boot-cm_2635.11_ds_32b-oc-uv-xtra-ram-fp-020711.zip

32A:
boot-cm_2635.11_ds_32a-oc-uv-xtra-ram-fp-020711.zip
Download: boot-cm_2635.11_ds_32a-oc-uv-xtra-ram-fp-020711.zip

32B (Must be on New SPL + Radio 2708 Combo):
boot-cm_2635.11_ds_32b_radio2708-oc-uv-xtra-ram-fp-020711.zip
Download: boot-cm_2635.11_ds_32b_radio2708-oc-uv-xtra-ram-fp-020711.zip

——–

Source:
https://github.com/cyanogenmod/cm-kernel
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

-merged (from android.git.kernel.org common):
cpufreq: Prevent memory leak in cpufreq_stats on hotplug
ARM: vfp: Move exception address fixup into vfphw.S

-merged (from thelogin n1batcal):
*finally* brought my github up to date with changes submitted to cm-kernel!
updated filenames, removing verb-like prefixes (e.g. getfull40 -> full40)

-rebase to kernel.org’s 2.6.35.11

Note:
This is not to be used on Gingerbread/CM7 RC0

Known Issues:
-**The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds**
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

**May not be an issue with current. Re-evaluating.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.11-oc-uv-xtra-btn-aud-ram-neon_fp-020711.zip
Download: boot-cm_2635.11-oc-uv-xtra-btn-aud-ram-neon_fp-020711.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel
https://github.com/thelogin/n1batcal

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Update (2/2: filename has not changed; please re-download and re-flash):
-merged (from android.git.kernel.org common):
ARM: vfp: Move exception address fixup into vfphw.S

…..

-aufs: patch in AUFS: http://git.c3sl.ufpr.br/pub/scm/aufs/aufs2-standalone.git
-defconfig: enable AUFS for modular build

-merged (from android.git.kernel.org common):
ARM: Stop irqsoff trace on return to user
ARM: 6490/1: MM: bugfix: initialize spinlock for init_mm.context
input: keyreset: Allow reset function to be overriden
cgroup: leave cg_list valid upon cgroup_exit
ARM: Fix up vfp exception location in thumb mode
input: evdev: Add missing wake_lock_destroy
PM: Dump suspend thread stack on dpm suspend timeout
input: keyreset: Only print message for default handler
cpufreq: Prevent memory leak in cpufreq_stats on hotplug
USB: gadget: f_mtp: Make sure request is dequeued if transfer is canceled (gingerbread)

In order for UMS (USB mount) to work on Gingerbread, this must be reverted:
https://github.com/CyanogenMod/android_device_harmony/commit/f51f9e2a1037b4e3fb1a

If you are using any of the external modules, please download them fresh and re-push them in to place.

Known Issues:
-When waking up from standby/sleep, the clock in the status bar will change when RTC changes in the next minute.
-If your BT Audio device does not work with the the stack that comes within your ROM, no audio will be sent to your device, and once you disconnect, you will need to plug in a 3.5mm jack and unplug to get audio back.
**Devices that don’t work: Jabbra.
**Devices that do work: Parrot audio, Jawbone, Nokia BH-905.

Things to do:
-backport AOSP’s frequency scaling
-clean up the barrage of warnings from TapnTap/Viewsonic’s patch

——–

-XTRA contains:
*ondemand governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*Tegra NvEC embedded controller driver
*erratas 430973, 458693 and 460075 applied

ViewSonic Gtab/Malata Zpad (Froyo):
boot-cm_2632.28-xtra-vfpv3_fp-020111.zip
Download: boot-cm_2632.28-xtra-vfpv3_fp-020111.zip

lib-2632.28.tar.gz (kernel modules)
Download: lib-2632.28.tar.gz

ViewSonic Gtab/Malata Zpad (Gingerbread):
boot-cm_2632.28_gb-xtra-vfpv3_fp-020111.zip
Download: boot-cm_2632.28_gb-xtra-vfpv3_fp-020111.zip

lib-2632.28_gb.tar.gz (kernel modules)
Download: lib-2632.28_gb.tar.gz

Note (from proengin for Malata Zpad):
You should be on CWM0.8 (bekit)
The bootloader.bin must match CWM0.8 (bekit)

——–

Source:
http://github.com/pershoot/gtab-2632
http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://github.com/pershoot/vision-2632
http://github.com/CyanogenMod/htc-kernel-msm7x30

——–

Instructions:
Flash the .zip through recovery

To use one of the kernel modules:
Pull the one you want from lib-2632.28.tar.gz (winrar can open this),
adb remount
adb push MODULE.ko /system/lib/modules/2.6.32.28-cyanogenmod/
adb shell chmod 644 /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko
adb shell insmod /system/lib/modules/2.6.32.28-cyanogenmod/MODULE.ko

Note:
You can download gscript lite from the Market, and put the insmod line in there, and tap when you want to insert it and use its functionality.