Archive for November, 2010


-increase low end by +.25
-slightly adjust thresholds for cpufreq_ondemand

-merged (from kernel-2635 master):
2987815a56c0a86ac58a (switch to PM_FAST)
ce2a80e89866dd9540fb (net: wireless: bcm4329: Add ‘setdfschannels’ command)

Note:
This is a Work in Progress. Undervolt/Frequencies will be adjusted over the next coming weeks, as well as merging in further optimisations/tweaks from the DS/Nexus .35 release.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2632.26-oc-uv-xtra-neon_fp-112310.zip
Download: boot-cm_2632.26-oc-uv-xtra-neon_fp-112310.zip

lib-2632.26.tar.gz (kernel modules)
Download: lib-2632.26.tar.gz

——–

Source:
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/coolbho3k/vision_oc_kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

-merged in ezterry’s new spl radio changes (using zinx’s fit to form for .35) but left disabled for now. will release a set of kernels to be used with the new spl in the near future.

-merged in other recent misc changes from cyanogen/AOSP common/kernel githubs.

-rebase to kernel.org’s 2.6.35.9

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

Known Issues:
-At sleep, you may not get all the way down to 122, although this is what has been specified. This is being investigated.
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-112310.zip
Download: boot-cm_2635.9_ds_32b-oc-uv-xtra-ram-fp-112310.zip

32A:
boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-112310.zip
Download: boot-cm_2635.9_ds_32a-oc-uv-xtra-ram-fp-112310.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.

-merged in -15 wireless driver, some wifi changes fromcyanogen/AOSP common/kernel githubs, and other misc changes (please see github for all changes).

-rebase to kernel.org’s 2.6.35.9

-merged in the latest battery driver additions from rogerpodactor/loginwithnoname

Known Issues:
-**The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds**
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

**May not be an issue with current. Re-evaluating.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-112310.zip
Download: boot-cm_2635.9-oc-uv-xtra-btn-aud-ram-neon_fp-112310.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel
https://github.com/thelogin/n1batcal

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Update (the filename has not changed; re-download and re-flash):
-re-merge Wireless driver 4.218.248-15 (cyanogen’s htc-kernel-mem7x30: c932d1e1b4ac8165a081) and keep sourcing bcm4329_204 in Kconfig (set SOFTAP in config)
-increase low-end by another .25 and increase min mv to 850.
-set TUN for module building

…….

-move to ‘bcm4329’ and update to Wireless driver 4.218.248-15 (cyanogen’s htc-kernel-mem7x30: c932d1e1b4ac8165a081)
-enable TUN
-merged up to kernel.org’s 2.6.32.26
-increased the low-end by +.75 and increase min mv to 825
-revert cpufreq_ondemand/interactive threshold modification

Note:
This is a Work in Progress. Undervolt/Frequencies will be adjusted over the next coming weeks, as well as merging in further optimisations/tweaks from the DS/Nexus .35 release.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2632.26-oc-uv-xtra-neon_fp-112210.zip
Download: boot-cm_2632.26-oc-uv-xtra-neon_fp-112210.zip

lib-2632.26.tar.gz (kernel modules)
Download: lib-2632.26.tar.gz

——–

Source:
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/coolbho3k/vision_oc_kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

-based off of HTC’s vision-MR-2.6.32-g9ab3677 (developer.htc.com) and supplied vision_defconfig (2.6.32.17)
-merged up to kernel.org’s 2.6.3.25
-merged in coolbh3k’s oc patch
-frequency range is from 806 to 1516; default bootup is 245-806.
-undervolt all frequencies (max mv is 1275)
-merged in zinx’s GAN_ETH wifi calling module modifications
-merged in a few changes from cyanogen’s github.
-optimisations based off of .35 release from Nexus/DS.
-added a few things to the config (-xtra (please see below and in github)).

Note:
This is a Work in Progress. Undervolt/Frequencies will be adjusted over the next coming weeks, as well as merging in further optimisations/tweaks from the DS/Nexus .35 release.

Known Issues:
-Wifi hotspot is not working (with CyanogenMod Rom). This will be fixed.

——–

-XTRA contains:
*ondemand governor default; only ondemand, userspace and performance governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2632.25-oc-uv-xtra-neon_fp-112110.zip
Download: boot-cm_2632.25-oc-uv-xtra-neon_fp-112110.zip

——–

Source:
http://github.com/pershoot/vision-2632
https://github.com/CyanogenMod/htc-kernel-msm7x30
https://github.com/coolbho3k/vision_oc_kernel
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.32.y.git;a=summary
http://developer.htc.com

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use the ondemand CPU governor.

Update (the filename has not changed; please re-dwnload and re-flash):

-revert (from kernel-2635 master):
769af0e5ecc69b867703 (remove FAIR_SLEEPERS_TIMER and FAIR_SLEEPERS_INTERACTIVE)
44dce337ddf14d9c55e2 (remove fork_expedited)
c7a17d27562ee328b5af (remove timer-driven next buddy)
82116fc9cbc7bcebb2a3 (remove interactivity-driven next buddy)
4372c58208046a7135ac (remove dyn_min_vruntime)
8623cd3d5d3c3a570116 (remove fair_sleepers)

……

-merged in recent changes from cyanogen’s cm-2635-exp branch (cm-kernel-exp android-msm-2.6.35-exp), which include PM QOS, RCU, scheduler, AXI, Kineto Gan VO-WIFI transport module, Interactive governor, HTC driver set, Wifi version 4.218.248-12, etc. changes. Please peruse the github tree for all changes.
-switch to TINY_RCU and enable RCU booster (with recommended boost value as per current shipping cm-2635-exp (cm-kernel-exp android-msm-2.6.35-exp) config).
-tweaking of ingo molnar’s minimum scheduling granularity patch
-threshold adjustment for Interactive governor
-switch to solely GENTLE_FAIR_SLEEPERS, and disable FAIR_SLEEPERS_INTERACTIVE and related.

-merged in recent changes from android.git.kernel.org’s common/msm github.

-merged in RogerPodactor’s/loginwithnoname’s latest additions to the ds2784 battery driver – http://forum.xda-developers.com/showthread.php?t=702167

Known Issues:
-**The first time you launch camera, you may experience a delay of up to 3-4 seconds after snapping a picture and being returned to the camera. If this is the case, exit out of the camera app by hitting the back button and re-enter it, and it should be reduced to 1-2 seconds**
-Camera will not work unless you are using CM6, CM6 Nightly or Enom’s Latest
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-**If charging stops, unplug and replug back in. Logic is being reviewed and amended currently.**
-You may receive “ACPU unable to set …” here and there. This is currently being worked on.

**May not be an issue with current. Re-evaluating.

——–

-XTRA contains:
*userspace governor default; only interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*3d register driver
*erratas 430973, 458693 and 460075 applied

boot-cm_2635.8-oc-uv-xtra-btn-aud-ram-neon_fp-110910.zip
Download: boot-cm_2635.8-oc-uv-xtra-btn-aud-ram-neon_fp-110910.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/nexus-kernel-2635
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.35-wip
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/xdabravoteam/cm-kernel
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery
or

fastboot flash zimage zImage (zImage can be found in update.zip kernel folder)
then

take the bcm4329.ko file from the update.zip lib/modules folder (use winrar for windows or unzip for linux) and

adb remount
adb push bcm4329.ko /system/lib/modules
or
copy the bcm4329.ko to /sdcard, bounce in to recovery, mount /sdcard and /system, and copy the .ko module from /sdcard to /system/lib/modules; set chmod 644 on it.

Note:
It is highly reccomended that you either use SetCPU to toggle your governor to either ondemand (reccomended) or interactive (in testing) or use sysfs to echo the value to cpufreq.

Note:
If you use SetCPU, please do not set any Advanced settings, and you should use ondemand CPU governor

Update (the filename has not changed; please re-dwnload and re-flash):

-revert (from kernel-2635 master):
769af0e5ecc69b867703 (remove FAIR_SLEEPERS_TIMER and FAIR_SLEEPERS_INTERACTIVE)
44dce337ddf14d9c55e2 (remove fork_expedited)
c7a17d27562ee328b5af (remove timer-driven next buddy)
82116fc9cbc7bcebb2a3 (remove interactivity-driven next buddy)
4372c58208046a7135ac (remove dyn_min_vruntime)
8623cd3d5d3c3a570116 (remove fair_sleepers)

……

-merged in recent changes from cyanogen’s cm-2635-exp (cm-kernel-exp android-msm-2.6.35-exp) branch, which include PM QOS, RCU, scheduler, AXI, Kineto Gan VO-WIFI transport module, Interactive governor, HTC driver set, etc. changes. Please peruse the github tree for all changes.
-switch to TINY_RCU and enable RCU booster (with recommended boost value as per current shipping cm-2635-exp (cm-kernel-exp android-msm-2.6.35-exp) config).
-tweaking of ingo molnar’s minimum scheduling granularity patch
-threshold adjustment for Interactive governor
-switch to solely GENTLE_FAIR_SLEEPERS, and disable FAIR_SLEEPERS_INTERACTIVE and related.

-merged in recent changes from android.git.kernel.org’s common/msm github.

Note:
If you want to use NFS, please push the contents of the .zip below to kernel/fs within /system/lib/modules/KERNEL_MODULES_FOLDER

nfs_32b.zip
nfs_32a.zip

Known Issues:
-At sleep, you may not get all the way down to 122, although this is what has been specified. This is being investigated.
-For builds lower then Froyo (i.e. Eclair), when USB is plugged in, vold will SIGSEV.
-After unplugging from USB, please reboot to prevent excessive battery drain. *This is being worked on.

——–

-XTRA contains:
*ondemand governor default; only performance,interactive,ondemand and userspace governors
*BFQ I/O Scheduler
*some more cgroup options
*namespaces support (excluding network)
*v4 block device and data integrity support
*errata 411920 applied

32B:
boot-cm_2635.8_ds_32b-oc-uv-xtra-ram-fp-110910.zip
Download: boot-cm_2635.8_ds_32b-oc-uv-xtra-ram-fp-110910.zip

32A:
boot-cm_2635.8_ds_32a-oc-uv-xtra-ram-fp-110910.zip
Download: boot-cm_2635.8_ds_32a-oc-uv-xtra-ram-fp-110910.zip

——–

Source:
https://github.com/cyanogen/cm-kernel-exp
http://github.com/pershoot/kernel-2635
http://github.com/CyanogenMod/cm-kernel
http://github.com/pershoot/ds-kernel-2635
http://github.com/pershoot/ds-kernel-32a-2635
http://github.com/toastcfh/htc-2.6.27-heroc
http://github.com/pershoot/ds-kernel-32a
http://github.com/bcrook/32A-EBI1
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-msm-2.6.34-test2
http://android.git.kernel.org/?p=kernel/experimental.git;a=shortlog;h=refs/heads/android-2.6.34-test2
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.34.y.git;a=summary
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.35.y.git;a=summary
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.35
http://github.com/ezterry/kernel-biff-testing
http://android.git.kernel.org/?p=kernel/common.git;a=shortlog;h=refs/heads/android-2.6.36
http://github.com/intersectRaven/ir-kernel

——–

Instructions:
Flash the .zip through recovery

then

Install SetCPU 2.x (by coolbho)
Autodetect, Min: 122, Max: 576, onboot, ondemand
Do not enable or setup Advanced

Note:
If you are coming from a previous oc-uv kernel, then please go in to SetCPU and raise the min bar up and then down back to 122.

Optional: You can setup profiles, but if you receieve lag, please be sure that your device is not stuck on a low frequency due to one of the profiles you have set and or due to cpufreq and SetCPU ‘oddness’.